Episódios
-
Have you ever noticed how some pots get really hot in the microwave? The gang talk about why this happens, and answer a listener question about coloring reclaimed slop glaze. They also talk about glow in the dark glazes and Rose’s recent video about them on the CMW YouTube channel. Do you have questions or need advice on glazes? Drop us a line at [email protected] and you could be featured on an upcoming show.
This week’s episode features the following topics:
Glaze colorants, glow in the dark, microwave, vitrification, Chrome
For today's episode we ask listeners to donate to the Craft Emergency Relief Fund and their efforts to help artists recover after Hurricane Helene. -
Welcome to a very spooky edition of Fluxed Up with Brett Kern. Today we dive into the precarious world of ceramics filled with funny stories, studio mishaps, and the quest for the ever-elusive perfect glaze. Join us as Brett shares his journey with slip casting inflatable dinosaurs, using commercial glazes, and dealing with dunting after material changes. Tune in for a dose of humor, technical tips, and a behind-the-scenes look at the life of a ceramic artist. Got questions or need advice? Drop us a line at [email protected]
This week’s episode features the following topics:
Slip casting, Dunting, Commercial glazes, layering glazes, spraying, luster
For today's episode we ask listeners to donate to the Craft Emergency Relief Fund and their efforts to help artists recover after Hurricane Helene.
-
Estão a faltar episódios?
-
Have you wondered how you can help support artists affected by Hurricane Helene? This week’s show is dedicated to sharing information and resources to assist the North Carolina clay community in rebuilding. The gang talks about assessing damage after a natural disaster, what supply chain issues we expect, and organizations needing support. If you’d like to contribute to disaster relief, please donate to the Craft Emergency Relief Fund at www.cerfplus.org.
This week’s episode features the following topics:
Asheville, Marshall, Penland, Highwater Clays, Mudtools, CERF
Today's episode is brought to you by Ceramic Materials Workshop.
-
Atmospheric firing is so much fun! What’s not to like about a process where you get to spray soda into a flaming hot kiln. This week the gang talk about the durability of cone 6 soda fired pots, and the process for identifying mystery materials. They also take us behind the scenes to talk about what goes into making videos for the CMW YouTube channel.
This week’s episode features the following topics:
Glaze troubleshooting, atmospheric firing, cone 6, soda firing, glaze, flashing slip
Today's episode is brought to you by Ceramic Materials Workshop. -
Have you heard of a Bristol glaze? This week on For Flux Sake the gang talk about the chemistry that makes these glazes work. They also discuss the crackle vs. crazing nomenclature, as well as the definition of porcelain. Do you have questions or need advice on glazes? Drop us a line at [email protected] and you could be featured on an upcoming show.
This week’s episode features the following topics:
Glaze troubleshooting, crazing, porcelain, Bristol Glaze, glaze
Today's episode is brought to you by Bailey Pottery Equipment and Archie Bray Residency.
-
Get ready for the wonderful and hilarious ceramic artist Lisa Orr! In this episode of our new For Flux Sake segment Fluxed Up, we dive into the precarious world of ceramics filled with personal stories, studio mishaps, and the ever-elusive perfect glaze. Join us as Lisa shares her journey with making low fired white wares, the influence red iron oxide has on aventurine glazes, and her recent research into Persian luster firing. Also, the gang talk about Lisa’s development of the Rocket Kiln, a fast-firing smokeless wood kiln. Tune in for a dose of humor, technical tips, and a behind-the-scenes look at the life of a ceramic artist. Got questions or need advice? Drop us a line at [email protected]
This week’s episode features the following topics: Glaze Troubleshooting, Rocket Kiln, Studio Stories, Ceramics Confessions, Lisa Orr, Red Iron Oxide, Filter Press, Studio Anecdotes, Behind the scenes, Potter, Ceramic Artist
Today's episode is brought to you by Bailey Pottery Equipment and Archie Bray Residency.
-
Have you ever heard of an Oolite? Find out more about this rare and interesting glaze precipitate on this week’s episode. The gang also take a trip to materials corner to discuss new potassium feldspars that could replace Custer Feldspar, and answer a question about kiln venting. Do you have questions or need advice on glazes? Drop us a line at [email protected] and you could be featured on an upcoming show.
This week’s episode features the following topics:
Glaze troubleshooting, kilns, kiln vent, Oolite, Custer Feldspar, Potassium Feldspar
Today's episode is brought to you by Bailey Pottery Equipment and Archie Bray Residency.
-
Join us as the For Flux Sake gang dive into layering glazes. Have you ever noticed some glazes look better below others, but not on top? Find out why the order you apply them matters and more on this week’s episode. We also have a surprise visit and a great question about Gillespie Borate from their #1 superfan Kookie Kane. Do you have questions or need advice on glazes? Drop us a line at [email protected] and you could be featured on an upcoming show.
This week’s episode features the following topics:
Glaze Troubleshooting, layering, Colemanite, Gerstley Borate, Gillespie Borate, Boron
Today's episode is brought to you by Bailey Pottery Equipment and Archie Bray Residency.
-
Get ready for a wild ride in the studio with ceramic artist Nick Sevigney! In this episode of our new For Flux Sake segment Fluxed Up, we dive into the precarious world of ceramics filled with personal stories, studio mishaps, and the ever-elusive perfect glaze. Join us as Nick shares his journey from porcelain skepticism to newfound appreciation, the impact of the Custer Feldspar shortage, and reveals the trials of handling glaze disasters. Plus, we uncover the joys and frustrations of gallery life and laugh over some truly memorable teaching moments. Tune in for a dose of humor, technical tips, and a behind-the-scenes look at the life of a ceramic artist. Got questions or need advice? Drop us a line at [email protected]
This week’s episode features the following topics: Glaze Troubleshooting, DIY, Studio Stories, Ceramics Confessions, Nick Sevigney, Custer Feldspar, Studio Anecdotes, Behind the scenes, Potter, Ceramic Artist
Today's episode is brought to you by Immaterial: 5000 years of Art, One Material at a Time, a podcast from the Met Museum.
-
We're kicking off Season 4 of For Flux Sake with a bang—or should we say a "ping"? Matt, Rose, and Kathy are joined by producer Ben to unveil some exciting surprises awaiting you in the new season. We're firing up a conversation about shivering, crazing, and all the unpredictable quirks that come with ceramics. Why is your glaze flaking off? Could your firing cycle or even hand sanitizer be the culprit? And what’s the deal with delayed crazing? We're here to get to the bottom of your ceramic problems! If you’d like to be featured on a future episode of the show please send your audio questions to [email protected].
This week’s episode features the following topics:Shivering, Crazing, Delayed Crazing, Paint your own pottery, Vitrification, Low-Fire Ceramics, Clay bodies, Thermal expansion
Today's episode is brought to you by Immaterial: 5000 years of Art, One Material at a Time, a podcast from the Met Museum.
-
In Episode 72, the gang discuss using acrylic paints on pottery. You'll learn when it's safe to use acrylics and find out the effects of firing temperature on your cold-finished pieces. Also we'll get into pyrometric cones yet again and break down the difference between cones and temperature readings. Why are those last crucial 100 degrees Celsius so important? And finally, we're discussing the benefits of bisque-firing underglazes. Discover how this step can help prevent color bleeding and other potential glaze flaws. Glazing problems? Kiln meltdown? Send your questions to [email protected] - you might hear the answer on the show!
This week’s episode features the following topics:
Acrylic paint, painted ceramics, ceramic sculpture, cold finish, pyrometric cones, kiln firing, heatwork, temperature, underglaze, glaze flaws
Today’s episode is brought to you by Immaterial: 5000 years of Art, One Material at a Time, a podcast from the Met Museum.
-
We start today’s episode learning why self-supporting cones are crucial for accurate firings, as well as everything you need to know about using cone plaques, from proper placement to reusability. We also delve deep into the world of firing temperatures talking about how to achieve vibrant colors at cone 10 while exploring the influence of alkaline earth fluxes on chemistry. Have you been thinking of substituting feldspars in your glazes recently? Make sure to listen and learn about the importance of finding the perfect feldspar match to balance your glaze chemistry.
Confused about glazes or facing a kiln crisis? Don't suffer in silence! Send the For Flux Sake crew a voice memo or message with your question to [email protected] - your problem could be solved on-air!
Today’s episode is brought to you by the 28th Annual Bray Benefit Auction.
This week’s episode features the following topics:
Pyrometric cones, cones, kiln, firing temperature, firing atmosphere, cone 6 vs cone 10, blue glaze, green glaze, copper carbonate
-
Listen in as the gang visit Materials Corner to discuss the latest updates surrounding the loss of Custer. Matt also answers a question from a brewer about the source of water that you use in your glazes. The answer might surprise you! Also, Kathy and Rose share how they've both used CMC in glazes and Matt dives into the science behind it.
Today’s episode is brought to you by Cornell Studio Supply.
This week’s episode features the following topics:
Water, Custer Feldspar, Glaze troubleshooting, CMC, material substitution
-
Listen to episode 69 where Matt, Rose, and Kathy discuss a listener's question about the use of ceramic bowls in the hair salon. Can ceramic be safely used for mixing hair dye? The team delves into the chemistry to determine if these bowls are a safe choice or a potential disaster.
Thinking about going green in the studio? The gang dives into listener concerns about sustainability in a large community ceramics space. Is lowering firing temperatures the answer? What about the materials themselves? Join the discussion as they explore how to strike a balance between eco-friendly practices and keeping a community studio functional.
Today's episode is brought to you by Bailey Pottery Equipment.
This week’s episode features the following topics:
Toxicity, leaching, glaze chemistry, glaze flaws, sustainability, eco-friendly, firing temperature, recycling clay, cone 10, cone 6
-
In episode 68, we're getting schooled on Shino glazes! Matt, Rose, and Kathy discuss some of the history, science, and stunning beauty of these unique glazes. The gang also takes a deep dive into the murky waters of water chemistry in glazes. Is it the secret ingredient or a total myth?
We'll also debunk some common misconceptions and explain why getting to know your specific gravity and viscosity is the real key to glaze consistency. Can you substitute tin in your glazes? Spoiler alert- it depends. Join the fun and listen in on the latest episode of For Flux Sake!
Today's episode is brought to you by Bailey Pottery Equipment.
This week’s episode features the following topics:
Shino glaze, Japanese ceramics, specific gravity, viscosity, glaze application, glaze troubleshooting, glaze firing, material substitution, tin oxide
-
Clay drama got you throwing shade? We've ALL been there! Join the For Flux Sake gang for episode 67 as we commiserate over inconsistent clay bodies and the woes of surprise firing results. We’ll explore the limitations of trying to adjust an existing clay body and glaze to meet your needs and some of the many reasons why commercial clay bodies can vary from batch to batch. Plus, we’ll shed some light on the truth about manganese myths. Learn what is and what is not an actual hazard to your health. Don’t rage-quit that project yet, listen to the latest episode of For Flux Sake and regain your sanity in the studio!
Today's episode is brought to you by Bailey Pottery Equipment. Bailey Pottery Equipment has everything you need, from beginner to pro. They offer top-notch supplies at discount prices, all backed by friendly service.
This week’s episode features the following topics:
Manganese, Toxicity, Absorption rate, commercial clay body, Clay absorption, reformulating clay, reformulating glaze, glaze fit
-
Listen to Kathy, Rose, and Matt take your glaze concerns head-on in this fired-up live recording from the convention this year! The audience delivered rapid fire questions to the gang so get ready for a hodgepodge of hot glaze conundrums. From water content and adjusting a recipe, to cracking the code on crazing crystals and banishing hard pan pandemonium, they tackled every question that came their way, and then some. Do you think anybody was able to stump them? Listen and find out. A special thank you to NCECA for co producing this episode and for supporting podcasting in the ceramics community.
Today's episode is brought to you by Snow Farm. From June 2nd-7th, join David McDonald for a hands-on workshop on making perfect-fitting lids for your thrown pieces.
This week’s episode features the following topics:
Glaze Flaws, Crazing, Crystalline, Crystallization, Glaze Formulation, Raw Materials, Glaze Application, Glaze making tips, NCECA, NCECA 2024
-
Listen to the final part of our conversation with the fantastic Freddy Fredrickson, former kiln master at Alfred University and founder of Fredrickson kilns. This episode will have you thinking beyond temperature when trying to get the most out of your kiln during your firings. Is cone 6 truly more energy-efficient than cone 10? Can your thermocouple be the silent hero of your firings? Freddy has answers to all your burning questions (pun intended!) and more!
Glaze got you in a daze? Mystery clay malfunction? Fire up your phone and send the For Flux Sake crew a voice memo or a message with your ceramic crisis at [email protected] - your problem could be solved on-air!
Today’s episode is brought to you by:
Bray Poxy archiebrayclay.com
This week’s episode features the following topics:
Electric Kiln, Cone 6, Cone 10, Cone 6 vs. Cone 10, Energy Efficiency, Energy Efficient Firing, Kiln Troubleshooting, Cones, Kiln Calibration, Kiln Design, Kiln Building, Kiln Efficiency
-
Join Matt as he dives deep into kilns with Freddy Frederickson, the legendary founder of Fredrickson Kiln Company. For over 30 years, Freddy wasn't just building kilns at The New York State College of Ceramics at Alfred University, he was perfecting the craft as their master kiln builder. In this first episode of our two-part interview, Freddy shares his remarkable journey. From the evolution of electric kiln technology to filling and firing an even kiln, listen in as he answers some of your burning questions about using your electric kiln.
Today’s episode is brought to you by:
Bray Poxy archiebrayclay.com
This week’s episode features the following topics:
Electric Kiln, Firing, Kiln, Kiln Troubleshooting, Kiln load, kiln firing
-
Thanks to everyone who came out to our live taping at NCECA. We had a blast and look forward to airing that episode in a few weeks. Today on the show the gang talk about the effect of mold in clay, bisque firing higher than your glaze temperature, and the wild wild west of slip formulas. If you need assistance with a ceramic chemistry problem, send us a voice memo with your question to [email protected].
Today’s episode is brought to you by:
Bray Poxy archiebrayclay.com
This week’s episode features the following topics:
Slip casting, Mold, Clay Durability, Glaze Application, Slip Formula, Bisque temperature
- Mostrar mais
