Episoder
-
On today’s show, we’re talking about things to think about when woodworking in the desert, non-digital information sources, cutting large cookies without the big tools, and buying your first dust collector
Sponsored by You: https://patreon.com/woodtalk
What's on the Bench
+Marc is making plywood workbenches and hating his life
+Shannon is crafting a craft beer Christmas
+Matt is using drawer slides and wishes he wasn't
Kickback
So many of you wrote in to say how much the burnout episode spoke to you. From those dealing with the loss of a parent to those struggling to find time for woodworking. Burnout is a very real issue and we are so thankful for all of you who commented and took the time to write to us about your own personal experiences with it.
Listener Questions
+Mike lives in the AZ desert and wonders how his dry climate changes how he woodworks and what he needs to consider when he builds projects that end up in much more humid climates.
+Lucas inherited a shop that is already plumbed for dust collection and asks about buying his first dust collector.
+Dane has a big hunk of burl that he resawed to make a chair seat. It took him a long time and left him exhausted and asks how he could improve other than buying a different tool.
+Jeremy spends enough time in front of a computer and asks how we feel about woodworking magazines as a way to get more woodworking knowledge.
Ask Us a Question: https://woodtalkshow.com/questions/
Finally you can find us individually at @mattcremona, @woodwhisperer, and @renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
We’re talking about… BURNOUT!!!, a tight riving knife, making big under-bevels, buying bulk lumber, and uneven table legs.
Hosted on Acast. See acast.com/privacy for more information.
-
Manglende episoder?
-
It’s show #576! On today’s show, we’re talking about a big WIA Recap, using a friend’s shop, resawing on the table saw, and when to use certain woods
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.
What's on the BenchMarc is making a coffee bar and fiddling with a full size vacuum press set up.Shannon is trying to design his own interpretation of a Conoid chair...and failing.Matt is shortening his life huffing paint fumes.Woodworking in America RecapRyan, Kyler, and Paul wrote in with glowing reviews of Woodworking in America. For some it was the first ever woodworking conference while others had previous experience with the show. In all it was a positive vibe with a lot more focus on the presenters and less on the marketplace. The general feel is that we hope the show continues and can keep the smaller, education focused feel.
Listener QuestionsKarter has a neighbor with great tools that he uses from time to time and asks how he can suggest that neighbor buy more tools so he can have his cast offs.Mark is resawing on his table saw with a small 8 1/4" blade and asks how he can get better results.David was recently given a bunch of wood and asks for resources to learn about which species are best for what application.Shannon Suggests:Lumber Update episode 68The Wood Databaseand this video of his lecture from WIA 2011
Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
On today’s show, we’re talking about…modifying a table, finish for a whiskey tumbler, salvaging parts from an old table saw, and woodworking with children.
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.
KickbackThomas ran off the road when the title bell rang in his headphones and he thought it was a bicycle right behind him. Our message: don't wear headphones when riding your bicycle.
Listener QuestionsLars wants to refinish a live edge desk and needs help matching the existing finish.Pennington wants to make a whisky tumbler from his friend's downed Red Oak tree.Peter has an unusable Rigid tablesaw and wonders if he can salvage and repurpose the parts.Jered has a 4 year old daughter and wants to work with her in the shop and needs advice.Michael wonders why shop is no longer in our schools and how to get a job in woodworking.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
We’re talking about building a table for a 3-season room, how can 6” sanders possibly be better and our go-to woodworking finishes.
Hosted on Acast. See acast.com/privacy for more information.
-
Is traditional joinery antiquated, a safe glue for food items, starter tools for odd jobs, why so much 4/4 lumber in Illinois, and ideas for a special picture frame.
Hosted on Acast. See acast.com/privacy for more information.
-
How NOT to take a Summer vacation, table saw flatness, coping with cross-eye dominance, wet legs, and plywood voids.
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #571 On today’s show, we’re talking about kids getting started in woodworking, shop lighting, woodworking slumps, and hand planed vs sanded surfaces.
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.
Listener QuestionsWeston is 13 and wants his parents to trust him around sharp tools.Jon wants to know if he should add splines to his large table top.Peter wants to know if hand planed surfaces are too smooth for some finishes.Christian asked about our shop lighting situations.Bob's been spending too much time on Instagram and asks if we ever get frustrated and disappointed with our woodworking.David's wondering if he should add support to his planer.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #570 On today’s show, we’re talking about tool knock-offs, resawing thin stock, glue and brads, which epoxy and saving the cherry trees.
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.
What's On the BenchShannon finished up his mother's urn.Marc is suddenly finishing floors because Matt is a bad influence.Matt is building drawer boxes like a real woodworker.Listener QuestionsCharles is in an ethical quandary about manufacturers and intellectual property of machine designs.Eric has questions about epoxy open time and which brand to use.Alex is building guitars and looking for a way to resaw thin materialShannon says, check out the luthier friendDaniels is concerned about the Cherry trees on the DC mall being cut down.Isaac asks about using brad nails to clamp glued joinery and if they are strong enough.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #568 On today’s show, we’re talking about hard vs soft sanding pads, the purpose of a shavehook, PVA glue life, emotional projects, Cabinets with drawers, and practice pieces out of pine.
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.
A HUGE THANK YOU TO ALL OF YOU WHO SPONSORED THE SHOW IN RESPONSE TO OUR LEAD SPONSOR LEAVING!!!
Listener QuestionsDavid wonders about the hardness of sanding pad for doing cabinet work.Jeffrey asks about using dividers between drawers on a cabinet.Chris wants to know the purpose of a shavehook and how to sharpen it.Josh has old PVA and asks if it can be used past it's shelf life, and what even is that?Check out this link from Titebond
Jeremy asks if we ever get emotional about finishing a project or completing a hard task.Joe asks if practicing in cheap Pine is actually detrimental.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #568 On today’s show, we’re talking about woodworker vs the HOA, sharpening a card scraper, flat bottom table saw cuts, and disposable blade hand planes
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.
A HUGE THANK YOU TO ALL OF YOU WHO SPONSORED THE SHOW IN RESPONSE TO OUR LEAD SPONSOR LEAVING!!!
What's on the Bench?Shannon is building an urn for his mom on a bum knee.Marc had some shop guests and built a table with a wiener.Matt is still making cabinets.News & KickbackAlex asks about this helical head router bit of death and how we feel about using it.
Listener QuestionsFantin asks about building a new shop at his new house and how to handle the HOA.Bill is using his ATB blade to cut cabinet dados and wonders if he needs a square grind blade.Johnathan got an Accu-Burr tool to help with card scraper sharpening but asks whether he needs to go back to the stones the re-hone the edge every time before pulling the burr.Les asks about disposable blade hand planes like RALI and whether they are worth it for a new plane user.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #567 On today’s show, we’re talking about shoulder planes?, the very super cool tools fence, and a question about router fences that Matt probably can’t answer.
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. Thank you Patrons.
WoodTalk is NOT brought to you by RocklerNo more Rockler sponsorship so yes, we have joined an ad network that is playing pre, post, and mid roll ads. Patreon supporters can subscribe to the ad free feed which can be found under the "My Membership" tab on the WoodTalk Patreon page. Or keep an eye on your inbox for the private RSS link.
Listener QuestionsHoward asks about Marc's experience with the Super Cool Tools fenceMichael asks about micro adjust on a router table fence and for suggestions."Joe" asks whether a shoulder plane is useful enough to justify buying or should he stick with a paring chisel.
Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #566 On today’s show, we’re doing another Oops! All Questions episode. We’re talking about some new tools, the longevity of glue joints, uses for CNC, and domestic hardwood alternatives.
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. Thank you Patrons.
NewsMarc is schilling books at the St Louis Woodcraft (Green Rockler) on Saturday, February 3rd.Listener QuestionsAlex asks our thoughts on the Bullseye Borer doohickeyChris is looking for options in domestic hardwoods beyond the usual suspects.Nathan has a question about modern glues and their longevity as compared to animal based glues of days past.Rocco runs a machine shop for a school and asks how he might integrate a wood CNC into the school and curriculum.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #565 On today’s show, we’re talking about power jointers vs jointer planes, finishing shop walls, which smoothing plane, and regretting Harvey Tools purchases?
What's On the BenchMarc is working on Ava's vanity and discovering parts move if you leave them around long enough.Shannon has no room in his shop due to home remodeling projects...so he's rebuilding his tri bike.Matt is working on the kitchen cabinets.NewsWe were sad to learn of the passing of Erik Florip
AIM acquires Popular Woodworking magazine.Listener QuestionsJustin asks about using a jointer plane vs getting a powered jointer for his mostly hybrid woodshop.Axel asks about finishing his shop walls.Luke wants a dedicated smoothing plane and asks whether a #3 or a #4 is the better choice.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #564 On today’s show, we’re talking about balancing a home shop and a work shop, Black Friday recap, and a whole bunch of kickback from YOU.
Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. Thank you Patrons.
Sponsored by Rockler[caption id="attachment_48624" align="alignright" width="300"] Click to enter and win![/caption]
Wood Talk is brought to you by Rockler! Rockler has been helping customers create with confidence for over 65 years. Rockler is giving away a $250 Gift Card to one lucky Wood Talk listener. Enter for your chance to win before December 31st at Rockler.com/woodtalk.
KickbackAlex is a super fan with more than 26K minutes listening to WoodTalk this year.Douglas says he will build stuff off Etsy with no ethical dilemma.Alex figured out the hardware he needs for his gaming table.What's On the Dining TableWhat did we find on Black Friday sales? Mostly that we were underwhelmed with it all.
Listener QuestionsAlex is thinking about maintaining 2 shops and 2 sets of tools.Alfred is looking for paint filler suggestions and wonders if he HAS to have a YouTube channel to be a successful woodworker.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
It’s show #561 On today’s show, we’re talking about gluing in the cold,dog hole placement, & Maintaining surfacing router bits
What's On the BenchMarc is working on a vanity and stopping for dovetail practice.Shannon is making marquetry Christmas cards.Matt finished off his sunroom and office, now back to the kitchen.Matt ReactsToday we talk about how Matt looks like Jesus
KickbackMark found a supplier for knockdownhardware for his gaming table in GermanyListener QuestionsWil lives up in Alberta and has an unheated shop and needs advice on doing glue ups and wood movement in the cold.Tom wants advice on wear and how many dog holes to add to his Joinery workbench.Alex asks about removing the pitch from his router surfacing bit and we suggest some handy products from Rockler for pitch removal.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected]
Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Hosted on Acast. See acast.com/privacy for more information.
-
Hosted on Acast. See acast.com/privacy for more information.
-
Hosted on Acast. See acast.com/privacy for more information.
-
Hosted on Acast. See acast.com/privacy for more information.
-
Hosted on Acast. See acast.com/privacy for more information.
- Vis mere
