Episodes
-
Episode 225
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
In Maker News š°šØ
Kregg Jig Domi-oh-noooooOnefinity UpdateNational Cutting Board Awareness Month5 great gift ideas videoMaker Faire was last month and they dropped ALL of the videos on their youtube channel!Whats on our bench: š¶
Dan lost footage for a video, got a new computer, falling behind on orders, cleaned out the shop, and is building a live edge coffee table.
Braden met up with a local maker to trade some dan scraps, sold his old 3d printer, got a new P1S and loves it, and packed his dust collector full of shavings.
Pete was at the WTB woodworking opening, Milled up lumber for a few projects, was sick as hell, he was a guest on shop sounds, started messing with chatGPT+, and I voted Early!
Questions:
Malcolm
Bossanova Woodworks
Its Cutting Board Awareness Month!
Alex Adams
Type A Furniture
Do you have surge protectors and back up power supplies?
Got my drum sander calibrated and dialed in. Any tips for a new user?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 224
Sponsors:
WTB Woodworking
Huntingdon Valley PA Store GRAND OPENING! October 26th 2024Join us for the grand opening of the store / maker meetup! There will be free food, launch day discounts, hands on with your favorite woodworking supplies and great company!
Get a free tee with any purchase! (While supplies last)
https://www.wtbwoodworking.com/Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Questions:
Alex Adams
Type A Furniture
What are your recommendations for a shop laptop?
I'm building 2x 6ft tables that need to be outdoors. It will be built our of doug fit beams and wood. Would you fill the holes and seal the wheels so they donāt rust?
Sarah
Rosie's Woodshop
I want to start working towards opening a school / learning center for people with disabilities. How should I go about setting it all up and what would you recommend I do to get started?
Nick Vreeland
NV woodshop
Dan and Braden, given that you are doing craft shows INDOORS, are you still demoing whiskey smokers
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Missing episodes?
-
Episode 223
Maker Camp Recap!
Guest Host:
Nick Brim
@nickbrimwoodworking8279
https://www.instagram.com/nickbrimwoodworking/
Sponsors:
WTB Woodworking
Huntingdon Valley PA Store GRAND OPENING! October 26th 2024Join us for the grand opening of the store / maker meetup! There will be free food, launch day discounts, hands on with your favorite woodworking supplies and great company!
Get a free tee with any purchase! (While supplies last)
https://www.wtbwoodworking.com/Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Questions:
Randy Dutertre
203 Designs
I'm looking to upgrade my chop saw. I'm considering battery powered vs corded and would love to know your thoughts.
Alex Adams
Type A Furniture
Some of my favorite memories from Makercamp 2024
Sarah
Rosie's Woodshop
What do I need to prep for the holidays to get my etsy fired up?
Malcolm
Bossanova Woodworks
Some of my favorite memories from Makercamp 2024
Thomas
latelieraboie
Hey itās Thomas and my maker camp question is not what you liked the most, the least, how many time hands were kissed and Juniper was shook. What I want to know, is, which of you gain the most weight ?
Now a non maker camp question. Iām using more and more the rotary tool on my laser to make my turned design a bit more original. I use the rotary tool that is sold for the Ortur laser and it works great for small design but I also want to cut into larger and heavier pieces and the chuck doensāt really hold well enough to my taste.
Do you know of a brand that offer a better rotary tool ?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 222
Sponsors:
Texas Woodworking Festival:
(WIN A TICKET!)
A woodworking convention showcasing new tools and trends. Featuring woodworking retailers, makers, manufacturers and more.
November 9th and 10th at the Palmer Events Center.
This event is a unique blend of an industry trade show, tool sale, educational seminar, and woodworking-themed festival.
Get your tickets today at https://texaswoodworkingfestival.com and use the code āAWP10ā to get 10% off your purchase.
WTB Woodworking
Huntingdon Valley PA Store GRAND OPENING! October 26th 2024Join us for the grand opening of the store / maker meetup! There will be free food, launch day discounts, hands on with your favorite woodworking supplies and great company!
Get a free tee with any purchase! (While supplies last)
https://www.wtbwoodworking.com/Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Whats on our bench: š¶
Dan sold his dust collector and installed a new unit in its place, FINALLY shipped the 213-day-overdue bed frame, ruined his hot end on his 2d printer, and he's down to only 2 overdue orders (down from 48).
Braden has been putting in work in the shop all week, he's officiating a wedding in Denver, got a new track saw, needs to make a toe kick for the kitchen island build before Maker's Camp and he's planning for his big craft fair.
Pete wrapped up a big engraving job, made a bunch of large live edge serving boards, invented a tool to make juice grooves easier, and taking a fusion refresher.
Questions:
Dan Western
Tiltes Sash Enterprises
So I know you guys like it raw but Iāve been making raw steel frames and wood pieces for 20 years. I have used a rattle can of clear from Rust-Oleum with great success. Another tip I was given from a rat rod shop was brush on Floods Penetrol. The penetrol adheres to dirt and everything so if the steel isnāt perfectly clean it will still stick. I had it on stool that I made for my brewery and they held up to abuse and cleaning for over 5 years no issues. Cheers guys.
Sarah
Rosie's Woodshop
Should i bring my own tools to Maker camp?
I'm thinking of bringing a pull cart with me to Maker Camp. Thoughts?
Josh The Dad
Templates. How thinck is enough? what material do you use? And where do you source it?
Thomas
latelieraboie
Hey Thomas here with a question !
Itās a good one :
What are the pros and cons of a country based on religious belief ? Alright byeee
Just kidding ! I just thought I hadnāt ask anything shocking in a while. By the way people remember, itās just a joke, donāt go up your high saw horses.
I actually have a question. I have done a lot of fair this past year and I found that products layout can really affect the look and sale of a stand. I have like 6 fair planned for December and I donāt know to do for my product placement.
Do you test layouts in your shop before or just wing it ? And do you generally prefer to spread all types of products on the tables or do you prefer to keep everything together ?
Mitch Hale
Horn Dog Maps
I'm getting a C
Support the show
-
Episode 221
Special Guest:
Mike Suitter
https://www.instagram.com/woodworkervscancer/
https://www.instagram.com/makersforstjude/
Donate or join the team at:
https://makersforstjude.org/
Sponsors:
CNC WITH ME
Join the ever-growing community and enjoy the many benefits such as commercial licensing, industry discounts, live support, and the access to the robust library of files, resources, and tutorials.
https://www.cncwithme.com/
Maker Camp
Join us for a weekend of making, crafting, and fun in the Catskills Mountains!
https://catskillmountainmakerscamp.com/
Listen to the whole episode for a chance to win 1 of 2 tickets!
WTB Woodworking
Huntingdon Valley PA Store GRAND OPENING! October 26th 2024Join us for the grand opening of the store / maker meetup! There will be free food, launch day discounts, hands on with your favorite woodworking supplies and great company!
Get a free tee with any purchase! (While supplies last)
https://www.wtbwoodworking.com/Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Questions:
Josh the dad
What do you do with all those IG spam accounts that follow/comment/message you?
Alex Adams
Type A Furniture
Now that the Maker Camp schedule is out, what events are you most excited for?
How would you finish raw metal legs for a table so it wonāt rust.
Sarah Goldstein
Rosie's Woodshop
What are 10 things we need to pack for Makercamp?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 220
Sponsors:
CNC WITH ME
Join the ever-growing community and enjoy the many benefits such as commercial licensing, industry discounts, live support, and the access to the robust library of files, resources, and tutorials.
https://www.cncwithme.com/
WTB Woodworking
Huntingdon Valley PA Store GRAND OPENING! October 26th 2024Join us for the grand opening of the store / maker meetup! There will be free food, launch day discounts, hands on with your favorite woodworking supplies and great company!
Get a free tee with any purchase! (While supplies last)
https://www.wtbwoodworking.com/Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
What's on our bench: š¶
Dan loves working with his helper, whipped out a pizza peal, he got a new dust collector, he loves his 3D printer, and is working on a new youtube video.
Braden is dealing with finished projects taking up space, planning for pop-up shops and craft fairs, optimizing his shipping and signage for shipping and craft fairs, he picked up a kitchen island build, and released a new 3D printed product!
Pete picked up sapele with keith from willard brothers for his adirondack chairs, decluttered his shop a bit by gifting his neighbor some workshop items and moving his lathe into storage for now, and celebrating his 4 year wedding anniversary / 12 year dating anniversary,
This week in Maker News š°
Chilhood cancer chalenge has $4000 in prizes for makers that participate. makersforstjude.orgPine Barren Maker Fest is this weekend! 9/21-9/22 https://pinebarrenevents.com/ Maker Camp is less than 20 days away! https://catskillmountainmakerscamp.com/Questions:
Morgan Hop
How do you guys stay consistent with your recording?
Thomas
latelieraboie
Hey! Thomas here with a question about painted nots.
Almost a year ago I made this huge book shelf for pine board and I painted it white as demanded by my client. I even use a primer but last week I went there to discuss a new project and looking at the book shelf I noticed that all the nots were visible as if they absorb all the white paint.
Any idea what happened there?
How to avoid this?
Thanks!
Alex Adams
Type A Furniture
How do you deal with your business being on your property?
Where do you dispose fo your sawdust?
Sarah Goldstein
Rosie's Woodshop
I've been thinking about bringing a lathe to craft shows to do live demos, but i am having a hard time with logistics. Please help!
How do you price out your lasering? By time? Is there a website like there is for 3D printing? Should I just see what it sells for on etsy?
One example is birth milestones
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
Support the show
-
Episode 219
Sponsors:
CNC WITH ME
Join the ever-growing community and enjoy the many benefits such as commercial licensing, industry discounts, live support, and the access to the robust library of files, resources, and tutorials.
https://www.cncwithme.com/
WTB Woodworking
Huntingdon Valley PA Store GRAND OPENING! October 26th 2024Join us for the grand opening of the store / maker meetup! There will be free food, launch day discounts, hands on with your favorite woodworking supplies and great company!
Get a free t-shirt with any purchase! (While supplies last)
https://www.wtbwoodworking.com/Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
What's on our bench: š¶
Dan is getting caught up with only 4 orders overdue, planning to work on a youtube video, got his second 3D printer, started prepping for holiday season, and making some cutting boards.
Braden is wrapping up the laser job, filled his shop with boxes, working with his new clamp rack, quoted a kitchen island build, and is prepping for craft fair season.
Pete has been working on laser files, printing and laser cutting new fun things to get organized, processed all the plywood he picked up last week, and started lasering stuff with the fiber laser to get familiar with the settings.
This week in Maker News š°
Childhood cancer challenge has $4000 in prizes for makers that participate. makersforstjude.org
Questions:
Sarah Goldstein
Rosie's Woodshop
Should I use some vintage nice looking tables that people were going to throw out for my workbenches or build new ones?
Alex Adams
Type A Furniture
Are you upgrading your iPhones?
If you had to run through a dollar store and got to laod up your cart, what would you get?
Cody Roberts
CodyRobertsWorkshop
Braden you mentioned UV printing before for cornhold boards. can you share where you got those?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 218
TOPIC: Holiday Prep the set up your shop for success.
Sponsors:
CNC WITH ME
Join the ever-growing community and enjoy the many benefits such as commercial licensing, industry discounts, live support, and the access to the robust library of files, resources, and tutorials.
https://www.cncwithme.com/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
What's on our bench: š¶
Dan is catching up on orders and is getting in the teens, right before getting a rush again, Sutton his helper has been a great backup in the shop, and he's dealing with some bad reviews?
Braden got a bunch of slabs from the omah-bros stash, installed the clamp companions, picked up a bunch of tools from a facebook marketplace score, and fixed his CNC tramming issue.
Pete is getting into the groove of things in the shop, working on trying out a new paint, went and picked up material from Makerstock, and visited Patrick Gensel.
TOPIC: Holiday Prep the set up your shop for success.
Our Holiday Prep List:
1. Plan ahead
2. Set clear goals and priorities
3. Notify friends and family and plan around events
4. DEADLINES - set deadlines and boundaries
5. DONāT FORGET Halloween, thanksgiving
6. Stock up on materials
7. Figure out your shipping and fulfillment - shipping and packaging
8. Research trends and popular items for the holidays - etsy holiday report, erank, tiktok, pintrest, etc.
9. Set up processes / efficiency / Plan out batching of items
10. Leverage social media / online marketing
11. Abandoned cart / thank you discounts
12. Personalization / holiday wrapping
13. Stock up on items where possible for those last minute shoppers
14. Self care / Donāt burn out!
15. Evaluate performance and take notes for next year!
Links:
https://bulkcuttingboards.com/
https://www.etsy.com/seller-handbook?ref=handbook
Questions:
Patrick Gensal
Dan can you give me your exact dimensions, material, and keywords for the C tables and slide tables? k thanks!
Sarah Goldstein
Rosie's Woodshop
These questions all pertain to in person craft shows.
1. So last year I made as much as I could, but didn't have my own shop so I bought things wholesale from some friends and sold them. They sold really well and I'm debating to do them again. What are your thoughts?
2. Do I go ham and make a ton of pens or learn something new with my new machines? I only have maybe an hour through monday-friday each day and Saturday to do stuff.
3. Do I have many diverse items with low count or a lot of the same things for craft shows with high count?
4. Should I premake ornaments with what I think they should say or just have samples and let people pick what they want (but then they are waiting around for it to laser). I can still add customizations.
5. I over did the craft shows last year and got burnt out and took off January and February, how do I avoid that? I don't think I'm going to sign up for as many shows but I do enjoy them.
Support the show
-
Episode 217
Special Guest:
Jessie Riggs
@Building_Jessie
https://www.instagram.com/building_jessie/
Sponsors:
CNC WITH ME
Join the ever-growing community and enjoy the many benefits such as commercial licensing, industry discounts, live support, and the access to the robust library of files, resources, and tutorials.
https://www.cncwithme.com/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
What's on our bench: š¶
Dan has a new helper, getting caught up on backorders, and planning on getting caught up on orders soon.
Jessie is working on a basement reno, new job, and bought a welder.
Braden had some cornhole tops UV printed, and wrapped up the box engraving job.
Pete is catching up on some brand content, getting back into the groove of things with daily content, made some new seats for outdoor stools, and helped Keith install a Harvey table saw fence install
Questions:
Unknown
Unknown
Jessie, did you fire Bradon from Sawdust Talk?
Thomas
latelieraboie
Hey!
Sorry I couldn't leave a voice mail tonight but I still have a question :
What would a project you would absolutely refuse to make for a client even if he accepted double the f you price?
I don't know maybe something like a huge oak door?
Alright bye!
Can someone sing my outro song
Sarah
Rosie's Woodshop
1 - Help me lay out my new shop.
2 - How did you get into all of this?
Frank
Silent Mars Workshop
What do you guys use for hold downs for CNC projects?
Mike
Broken Lead Woodworks
Have you guys dealt with some affiliate sales that have not paid you your affiliate $?
Jeff
Makers Way
You know the voice I want. The sweetest juiciest voice.
What's up my Beautiful Baby Bubbas and Big City Jess! You may not have heard, but Maker camp is coming up soon and I cant wait to give each one of you a big ol Mouth Hug. Since you brought up Maker Camp, here's my Q for your Sweet A's. Is there a random thing or nicnac you ALWAYS pack, regardless of where you're traveling? I'm not talking about regular stuff, like a toothbrush or an extra pair of undies incase of an accident. For example, I always pack swim trunks nomatter what time of year or where i'm going. Just in case theres a lake around or a pool we can break into. Or Something like Braden's security Blanky. Something that everyone doesnt always pack. What's a "Must Pack" for you guys?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/Support the show
-
Episode 216
Sponsors:
Maker Camp
Join us for a weekend of making, crafting, and fun in the Catskills Mountains!
https://catskillmountainmakerscamp.com
Listen to the whole episode for a chance to win 1 of 2 tickets!
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News š°
Dan hit 7000 Etsy salesOliver 15ā planerMakerās handmade 1 year anniversaryWhat's on our bench: š¶
Dan is recovering from a back injury, behind on a bunch of projects, and is still down a helper since his shop help stopped showing up,
Braden is deep in his box lasering job, did a charity car show vendor event with Nick Brim, working on the corporate branding jobs, and is working on a bathroom vanity
Pete is taking it easy with the baby, cleaned up his lumber shed, and is working on some outdoor furniture.Questions:
Alex
Type A furniture
What jigsaw do you recommend for best dust collection?
Follow up to last weekās question.
Patrick Gensel
What is some stuff you guys are working on for this yearās holiday rush?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 215
Sponsors:
Bits+Bits Co
Get your hands on the best bits in the business! With their proprietary AstraHP Coating that helps keep your bits cool and stay sharper, longer. Most orders ship the same business day if placed before 2:45 pm pacific.
Use code āAWPā for 10% off your order!
https://bitsbits.com/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News š°
IWF Atlanta happened
Festool Exoskeleton coming soon
Emma had a baby
Shaper is running a promo on gen1 origins
Prusa updates their line to the MK4S
Whats on our bench: š¶
Dan has just been rocking on etsy orders and getting caught up.
Braden got a ton of etsy orders, prepping for craft fairs, received a huge order of boxes for a laser job, making stuff for a car show, and got some rock solid clamp companions for doing glueups.
Pete had a baby! Well...it was actually Emma, but he was there too.
Questions:
Thomas
latelieraboie
How do you get back into the swing of things after a holiday (vacation)
I'm finishing my shop floor and want to enclose the section of my shop with the boiler and mechanical so that it doesnāt get as dusty. Also this would give me another wall to put tools up against.
Sarah
Rosie's Woodshop
I posted a youtube video! Do you guys record vertical for IG and horizontal for YouTube?
Alex
Type A furniture
Following up on the flattening question.
Harvey has a new DC. Dan, you going to get it to make Pete feel bad that his is smaller?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/Support the show
-
Episode 214
Sponsors:
CNC WITH ME
Join the ever-growing community and enjoy the many benefits such as commercial licensing, industry discounts, live support, and the access to the robust library of files, resources, and tutorials.
https://www.cncwithme.com/
Maker Camp
Join us for a weekend of making, crafting, and fun in the Catskills Mountains!
https://catskillmountainmakerscamp.com
Listen to the whole episode for a chance to win 1 of 2 tickets!
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News š°
Cam - Blacktail studios - Misusing toolsLee Ohman - Badass table for BruntThomas Custom Woodworks - He's sleeping...a full 8 hours. Wakes up well rested. Gross.Brad Rodriguez - Hiring production assistant (local)Whats on our bench: š¶
Dan had a great time at Braden's birthday party, recovering from the massive storm they had and losing power for almost a day, setting him back in the shop.
Braden has been working on the car-themed signs and gifts for a car-themed craft fair, waiting for corporate approval for the laser box job, and he had a birthday party!
Pete did some landscaping and chainsaw work around the property, worked on a live edge shelf for the house, and is aimlessly wondering around the shop and house awaiting the baby. (Still not here)
Questions:
Alex
Type A furniture
I'm not mad...i'm just disappointed
I'm having issues with tareout on endgrain using a flattening fig. Any advice?
Max Reid
Reid Design Co
Itās been a few weeks since Iāve really posted anything on Instagram, as Iāve been lacking motivation lately. What do you all do to combat the feeling of staleness with content creation and keep it fun and interesting?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 213
Sponsors:
Bits+Bits Co
Get your hands on the best bits in the business! With their proprietary AstraHP Coating that helps keep your bits cool and stay sharper, longer. Most orders ship the same business day if placed before 2:45 pm pacific.
Use code āAWPā for 10% off your order!
https://bitsbits.com/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News š°
John Melecki video - GOT Westeros TablePrusa MK4 print on anythingVacuum bed on onefinityOnefinity PodcastIWF coming up in augustWhats on our bench: š¶
Dan's missing his shop help, cranking out etsy orders, started work on the bed frames, made 10 cutting board blanks out of scraps, keeping busy with slide table orders, and replaced brakes on his daughter's car.
Braden crushing through car themed items for the car event, waiting for a final approval for the laser job, ordered inexpensive cutting boards for lasering, and had to deal with a bat stuck in the shop.
Pete is inspecting his home and making a ginat honey-do-list for himself, lasering signs for the month markers for the baby, got a new chainsaw , and got help from Alec (@medallionmakerbranding) with his fiber.
Questions:
Alex
Type A furniture
Cans of finish haven't changed in a long time. Do you think we could have fixed them or had an improvement by now?
The dust collector is Emma's push present, right?
Sarah Goldstein
Rosie's woodshop
I just got a chop saw and a scroll saw. What should I make first?
Randy
Very expensive CT
My question is do you guys have a 5-4-3-2-1 plan for success? Where do you want to be in 5 years from now, in 4 months from now, in 3 weeks from now, 2 days, and in 1 hour with your business.
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 212
Special Guest:
Colton Hagler
@Coltcrit
https://www.instagram.com/coltcrit/
https://coltcrit.com/
Sponsors:
CNC WITH ME
Christmas In July (July 1-31st)
Holiday Themed CNC Projects Every Friday In JulyOver 100 Christmas SVG FilesOver 100 Christmas STL FilesCNC Secret SantaCreate and exchange digital svg files with other makers across the globehttps://www.cncwithme.com/
Maker Camp
Join us for a weekend of making, crafting, and fun in the Catskills Mountains!
https://catskillmountainmakerscamp.com
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Whats on our bench: š¶
Dan has some help in his shop thatās keeping him motivated, released a new table for sale, making a custom design c-table, and visited some woodworkers in the area to brainstorm some projects with them.
Braden is going full speed on a few projects, working with a car sow non profit, making a bunch of car-themed projects,
Pete set up the fiber laser, has been working on revamping a bunch of files for the laser and CNC, hung out with some maker friends, and is just prepping for the baby.
Colton is working on a cornhole board with a leather like pattern on top using resin, and restoring an old large german piece of antique furniture.
Questions:
Nick Paccia
The working grain
How do you stay efficient with your CNC? How do you keep track of projects that might take a few days between making the file and cutting it in wood?
Matthew Brodrick
What are your recommendations on finishing plywood endgrain?
Malcolm
Bossanova Woodworks
How do you guys price your 3d prints?
Jeff
Makerās Way
How do you keep the creative juices flowing?
Victor
Wimm designs
Looking to get into etsy, do i need a whole catalog or is 1 file enough?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 211
Sponsor:
PWN CNC
Check out PwnCNC for all your CNC accessories!
https://pwncnc.com/?ref=aasemfvo
Use code AWP for 5% off your order.
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News š°
Makers for Saint Jude raised 10k
https://makersforstjude.org/Keith Johnson - New belding / finish video
https://www.youtube.com/@KeithJohnsonCustomWoodworkingSuman - UV finishes video
https://www.youtube.com/@WoodcraftBySumanSurfprep - Sandpaper price drop / gen2 sanders are live
https://surfprepsanding.com/ (Use code AWP)Whats on our bench: š¶
Dan smoked his first brisket, shipped out some tables, started working on a new table design, and Dan had an "incident"
Braden is having a production lull, working on some fun projects, working on his website, and getting a new roof.
Pete installed the new dust collector, revamped his laser area, working on his computer cart, and finishing setting up his fiber laser.
Questions:
Sarah Goldstein
Rosie's woodshop
I'm setting up a lathe in my apartment and I'm making an enclosure around it with tarping for keeping the dust in. How would you make content around that?
Mike Holmes
Broken Lead Wood works
Ive had some neighbors ask me to bring their kids into the shop and teach them some woodworking. What would you do?
Alex
Type A furniture
Customer followups. How do you guys follow up with customers after they have completed the purchase and got their item?
Randy
Very expensive CT
What do you have as the floor in your shop? Mats, foam, rubber, epoxy, wood?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 210
Sponsor:
CNC WITH ME
Christmas In July (July 1-31st)
Holiday Themed CNC Projects Every Friday In JulyOver 100 Christmas SVG FilesOver 100 Christmas STL FilesCNC Secret SantaCreate and exchange digital svg files with other makers across the globehttps://www.cncwithme.com/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Whats on our bench: š¶
Dan is down a helper because he's on vacation, had Kayla help out in the shop, had a rough camping trip, and is dealing with some dummies on Etsy (NEW SEGMENT)
Braden has no commissions or customer orders right now so he's taking the opportunity to build some furniture, mainly a media console. Had his first return in the online shop.
Pete took the week off from the shop, working on the honey do list, Smoked a bunch of meat this weekend, did some admin work for the pod.
Questions:
Alex
Type A furniture
Dan how do you run 2 CNCs at the same time? Can you show us?
I need help with dust collection in the shop and im looking to use a flexible hose. What woiuld you recomend for the best dust collection solution?
Jake Miller
A Suite Shop
How do you guys handle being done with a project? Do you beat yourself us over mistakes and nitpick over the details?
Thomas
TSG Makes
Im thinking about redoing the floor in my shop with OSB. What would you recommend and how would you flatten out the floor in your shop?
Max Reid
Reid Design Co.
If you could only go to one meetup, which one would you choose?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 209
Special Guest:
Michael Williams
@CalaveraToolWorks
https://www.instagram.com/calaveratool/
https://calaveratoolworks.com/
PWN CNC
Check out PwnCNC for all your CNC accessories!
https://pwncnc.com/?ref=aasemfvo
Use code AWP for 5% off your order.
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Questions:
Josh the dad
Where does leatherworking fall in cost-wise in all the other making styles (woodworking, sowing, metalworking)
What tools do you need to get started in leatherworking?
Thomas
TSG Makes
Mike, how many apron can you make with one cow ?
Can you make an apron from something cool like, I donāt know, wolf hide ? Bear hide ? Whale hide ?
Finally, Iām a wood turner so when I found the turner apron and I was really impressed, like it look so much better than my amazon apron I got when I started. The worst is that it has deep pocket that fills crazy fast with shavings and dust.
My only question is, could you make a tuner apron with a sword like scabbard but for a bowl gouge. First I will look awesome. And second, well, it really sounds cool, right ?
Randall
I had a customer request that I soak a board in oil, cut it to show the penetration, and then glue it back together. Whats your strangest request from a customer?
Alex
Type A furniture
ā¦Straight to jail
Jared
What do you recommend for my first budget laser?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 208
Special Guest:
Ashley Wooten
Ashwood & Hawke
https://ashwoodandhawke.com/
https://www.instagram.com/ashwoodandhawke/
30 in 30 Challenge - Get a custom sign or mosaic for a huge discount [Limited Time]
https://thehouseoftimber.com/collections/ashwood-timber/products/ashwood-timber-logo?variant=41546927472709
Sponsor:
Maker Camp
Join us for a weekend of making, crafting, and fun in the Catskills Mountains!
https://catskillmountainmakerscamp.com/
Listen to the whole episode for a chance to win 1 of 2 tickets!
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
Questions:
Mike Suiter
WoodworkerVsCancer
Iām doing a vendor event for a race and I'm looking for some ideas of things to sell.
Max
Stubby K Studio
What Cad/cam software do you recommend for Onefinity with the Masso controller?
Malcolm
Bossanova Woodworks
What tips do you have for finding businesses to sell your goods to?
Max Reid
Reid Design Co
We got some vintage pocket doors and are looking for some ideas as to what to do with them.
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 207
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News š°
* Makers for Saint Jude raised 10k
https://makersforstjude.org/
Whats on our bench: š¶
California West Coast Maker Meetup Recap
Questions:
Kimani
Now that you are back home, have you unpacked yet?
Do you have TSA PreCheck?
Randall
When you were starting out, what was the tool you were terrified of?
Alex
Type A furniture
What are some of your customer red flags?
Where should I start if I want to get into the Surfprep system?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://www.etsy.com/shop/awpstore
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.etsy.com/shop/pTreesWorkShop
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://www.etsy.com/shop/ddwwstore
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
-
Episode 206
Sponsor:
Surf Prep Sanding
https://surfprepsanding.com/
Use Code āptreeā for a 10% off discount
Surfprep West Coast Maker Meetup:
https://www.instagram.com/p/C5rw-xrLy_4/
Sign up for Patreon for Early access, and special Patreon-only content:
https://www.patreon.com/anotherwoodshoppodcast
This week in Maker News š°
Surfprep - https://www.instagram.com/p/C5rw-xrLy_4/
Bambu 3d printer sale
Fatherās day sales!
Whats on our bench: š¶
Dan had his shop helper start, spent 2 days getting him started and aclimated to the shop, packing up some difficult stools for shipping, took down the kid's fort in the living room, delt with some cupped 3d carves, and got caught up with
Braden is figuring out his lead times on the laser jobs, delivered the cedar planter boxes, and is catching up onorders before the Cali trip.
Pete worked more on ice climbing tools, got caught up on content he needed to get out before cali, and installed a bunch of equipment in the shop from the boxes sitting there for the last few weeks.
Questions:
Kimani
What guidance do you have for people looking to get a 3d printer?
Josh The Dad
Heard your music on a commercial. Legal action?!
Thomas
Update on the wood bugs.
How would you guys deal with using templates? Laser, paper, freehand?
Alex
Type A furniture
What would you recommend for getting better content out?
You can send in your question to get answered on the podcast!
Record your question or comment on your phones voice memo app and email it to [email protected]
You can follow us all and the podcast on Instagram and YouTube!
Podcast:
https://www.instagram.com/anotherwoodshoppodcast/
https://www.youtube.com/anotherwoodshoppodcast
https://awpstore.etsy.com
Pete:
https://www.instagram.com/ptreesworkshop/
https://www.youtube.com/ptreesworkshop
https://www.ptreeshop.com/
Dan:
https://www.instagram.com/danieldunlap.woodworks/
https://www.youtube.com/danieldunlap
https://ddwwstore.etsy.com/
Braden:
https://www.instagram.com/littlebugwoodworking/
https://www.youtube.com/@littlebugwoodworking
https://littlebugwoodworking.com/
Support the show
- Show more
