Episodes

  • In Episode 37 of TGR we sit down with Lars Jacob of Wild Surroundings. We speak on hunting out of layout boats, shotgun fitting, bird hunting, and at length about the unique underhammer rifle, which Lars built a number of in his early career.

  • Joel has the opportunity to catch up with Diggory Hadoke, author, shooter, and firearms and hunting advocate. Diggory has written several notable titles focused on vintage British sporting arms including hammer guns, vintage guns, and the British boxlock. Diggory works at vintageguns.co.uk and is an absolute wealth of knowledge when it comes to the history and development of modern cartridge arms. The conversation focuses on the history and development of sporting arms from around 1850 through the turn of the century and beyond. If you have ever had an interest in early cartridge arms development and the rich history that is intertwined with British firearms do not miss Episode 36. 

  • Episodes manquant?

    Cliquez ici pour raffraichir la page manuellement.

  • In this episode of The Gun Room, Joel talks with Brian Dudley of BMD Gunstocks. They talk about Brian's fine art background and how he transitioned into firearms full-time. The conversation covers a variety of topics related to stock making including original finishes, shaping, and finishing stocks including a good conversation about stock checkering.

  • Part 2 of a discussion with Nick Larson of The Birdshot Podcast. Nick and Joel talk about Nick's turkey gun project and the jitters surrounding drilling into your gunstock. The discussion moves into progress and updates from the Upland Gun Company where we talk about their new offerings and the process of creating your own upland shotgun.

  • To me, the Savage 24 represents youth and the carefree existence that places a child in the woods, free to roam as they see fit. It harkens to an older time when this child's feral existence was the norm rather than the exception. Going out the backdoor of a white farmhouse with a few .22LR rounds and a few .410 shells in his coat pockets, looking for a rabbit or maybe a partridge for the table. The gun is kept in the corner of the mudroom, alongside boots and coats, a scruffy dog waits outside the door, tail wagging, waiting to accompany the boy as they head out into the big wide world.

  • Welcome Back to The Gun Room! We have the opportunity to go to Brays Island in South Carolina where we visit the home of Eric Klein, the keeper of a very fine collection of early American side-by-side shotguns. Both originally from New Jersey, Eric and Joel cover a variety of topics including the philosophy of collecting vs accumulating as well as some good discussion with a focus on Parkers and Ithacas. Eric takes us on a tour of his gun room and shows us some very unique guns in his collection. 

  • Joel and Gregg have the opportunity to catch up in the midst of the bird hunting season on Episode 31 of The Gun Room. Gregg keeps up the Dogs and Doubles webpage as well as keeping the upland world abreast of some of the better deals in the sporting shotgun market. His posts about 5 guns you shouldn't miss are surely a hit for anyone in the market for a fine shotgun. After a quick season update, Gregg and Joel dive into a discussion surrounding double guns and the current state of the gun market. They speak on a number of topics including the merits of guns from around the world, gun features, and gun makers. The discussion touches on a number of different elements one should consider when looking at purchasing a shotgun. Join us this week to learn a bit more about what makes a fine gun worth the price.

  • Join us for a conversation with Amanda Rutherford of Zeb gunmaking. Amanda attended gunsmithing school in Colorado where a fortuitous trip to the Dallas Safari Club show led to an apprenticeship with Chuck Grace as a stockmaker. Amanda and I discuss some of the finer points of the master/apprentice relationship, the value of gunsmithing school, and her journey to becoming a gun maker on her own. We also touch on some of her custom gun work and run-ins with some legendary gunmakers. This and so much more on Episode 30 of The Gun Room. https://www.zebgunmaking.com/

  • Barrel Proofing

    Dad and I were browsing the used gun rack at a big box store on a trip through Pennsylvania a few years back when we happened upon a double gun that caught our eye. The gun was a 12ga with light color walnut stock and forend. On closer inspection, we saw a moderate amount of hand-cut engraving, as well as hand-cut checkering on the buttery walnut stock. An older gun made in Europe, the tag read ‘BLNE’, as it is sometimes referred to in gun parlance or a boxlock non-ejector. We speculated on the country of origins and details of the gun’s specifications until we could get the attention of one of the clerks to ask if it was OK to take the barrels off the action and check the proof marks.

    Spend any amount of time in a gun shop that deals with guns from Europe and you will inevitably hear someone say “check the proof marks”. This statement broadly suggests checking the markings on the barrel flats and action watertable(on a shotgun). These are the two areas that gunmakers typically apply stampings pertaining to original specifications of the gun like chamber length or choke. It is also the area where proof houses apply proof marks on a gun.

    Proofing is a type of (potentially) destructive testing whereby a firearm is discharged with appropriate dimension ammunition that has been overloaded with powder on purpose. Shooting a round overcharged with powder produces higher than normal pressure inside the barrels and action when the gun is fired. If the gun can withstand the increased pressure produced by an ‘overloaded’ round, it will withstand the significantly lower pressure of standard factory ammunition. Guns are measured before and after testing and fired remotely while being held in fixtures inside secured rooms for safety reasons. Proofing is a pass or fail test, there is no middle ground. Guns that fail may experience a bulged or split barrel, or in extreme situations, action failure can result in shattered parts.

    Proofing firearms began hundreds of years ago in Europe(1637 in the UK) and continues to be conducted as described above. 14 countries in Europe have adopted standards laid out by CIP (think international proofing organization) which now dictate the pressures various firearms need to withstand to make proof.

    Each proof house in Europe developed its own proof marks. These marks changed over the years and can help date a gun or determine a gun proofed with black powder or modern smokeless powder. Most European guns were proofed in the country in which they were made, or at least the country where they were assembled to the point that they could be shot. As a result, the proof establishes the maker’s country, and in cases where countries had more than one proof house, will determine which proof house the gun was tested in. For example, 6 different German proof houses are Ulm, Hannover, Kiel, Munich, Cologne, and Berlin each of which has a different proof mark.

    Jumping back across the pond, the obvious question becomes, “Where are the proof marks on Granddad’s old Ithaca Flues?(insert any american gun name here)” Despite the fact that Europe developed a comprehensive proof testing standard, the United States has left that responsibility on the shoulders of the manufacturers, who for the most part, have held up their end of the deal. American shotguns and rifles are tested, though the extent of testing is left up to discretion. This is not to imply that American made guns are unsafe, but rather the imputis of burden is on the makers themselves to ensure the end safety of the user. Makers could test every gun, or simply choose random samples to test. And, in todays complex and advanced manufacturing facilities, there are a myriad of other tests that can be done to ensure the quality, durability, and safety of a firearm.

    Back in the gun store in Pennsylvania Dad and I took a look at the markings on the double gun that caught our eye. Typically on the flat sections of the action and barrel you will find several different marks. The serial number, if the gun has one, will be located here. Usually it is stamped on both action and barrels of a shotgun, and can also be stamped into the forend iron as well as the forend and stock wood(though always hidden where you have to remove them to see the numbers). On fine guns, many parts are also stamped with the serial number or at a minimum the last three digits of the serial number. On guns where hand fitting is required, not all parts can be transferred between guns; this helps in the factory to ensure the correct internal parts stay with the action in which they fit. The importance here is taking note if these numbers are matching throughout the gun. Mismatched numbers indicates that the gun has been composed of parts that were not originally manufactured together, which in turn can affect the value of the gun.

    After the serial number, we typically look for the proof house mark that indicates where the gun was proofed, and its country of origin. The gun in question possessed a LEG proof mark referring to the Liege Proof House in Belgium. Since there was no makers name on the gun, we were left to assume it was a ‘guild gun’. That is to say that it was a gun made by a variety of outworkers- the stock may have been made by one individual, checkered by another. The metal work done by yet another craftsman, and then the parts assembled. Guilds were frequently found in Belgium and Germany, though the idea of outworkers performing various tasks and sending parts back to the primary maker is commonplace in the gun trade.

    The next significant mark found was a lion over a “PV” indicating a nitro proof. This is where the proof house markings come in- this nitro proof gives us a good reason to believe the gun will be safe to shoot with smokeless powder. It is not uncommon to see multiple proof house marks, and this is where a knowledge (or good book) can help. Marks changed over time, and occasionally you will see a gun that was originally proofed for black powder, that carries a second set of marks indicating that it was re-proofed for nitro powder.

    It is a requirement that guns be reproffed in Europe depending on what work is done to them. If a gun was orignally a 2.5” chamber, which is lengthened to 2 ¾”, the gun must be reproofed. The same goes for if a gun is sleeved- new barrels put on an old action. Flats on guns like this can seem a jumble of marks but they all tell part of the guns story.

    Our gun was also marked with a 12 and a 70 in a circle indicating its 12ga, 2 ¾” chambers. Thinking in metric terms, 65 or 65mm would indicate 2 ½” chambers, with 70 or 70mm being the elongated 2 ¾”. Though those may be what some consider the important marks, there can be many more marks in these areas worth checking out. On the barrel, you will often find the choke designations - this gun had them as numbers- 18.3 and 18.4- metric bore measurements.

    There are other marks like a star over a U, a script 3, double stamped numbers and more- these can be preliminary proof marks, final proof marks, controller marks, personal makers marks, or the individual at the proof house that tested the gun. There can also be a number in Kg or kilograms that indicates the weight of the barrels at the time of proofing.

    Proof marks can be our best link to a guns history, much like a passport that helps reveal a bit about the gun and its past. They can tell where the gun came from, where it travelled in its lifetime, and so much more. They are certainly one of my favorite aspects of old shotguns and rifles. All in all the Belgian guild gun was well worth the $ paid and it is now living happily amongst the other guns on my rest farm for old shotguns. The lesson: a base knowledge of proof marks is a handy thing when assessing used guns and certainly helped solidify my decision to buy, rather than pass, this particular double.

  • One of the most common things folks do when inspecting a potential shotgun purchase is shoulder the gun. It seems an interesting thing that ‘gun mount’ is such a crucial part of the gun purchase, but so many folks simply shoulder a gun and assign a non-quantitative value to it: “oh this shoulders nice” or “feels right”. So many of those folks realize that a gun must ‘fit’ but very few actually know or understand their own dimensions and how they translate to a gunstock. The same holds true for backyard clays shooting when you try a new-to-you shotgun that seems to break everything you point it at. In those situations gun fit and by association stock dimensions are the heart of the matter. Im Joel Penkala and this is 10 Minutes on Gun Fit.

    The most basic of gunstock dimensions and one that is actually addressed by some gun companies is the Length of Pull or LOP(as it appears on many online gun listings). The length of pull is the distance from the center of the trigger, rearward to the center of the butt plate or pad. This is also expounded upon at times with three different LOP measures: LOP to the heel, center, and toe. The comb is the top of the stock, where your cheek rests which terminates at the heel, while the toe is the bottom portion of the end of the stock. It is typically tapered and comes to a point. LOP to the center determines the primary contact between shooter and buttstock, but the heel and toe measures give an idea of the stock’s pitch.

    Pitch is the angle between a line defined by the rib (and/or comb) and the line defined by the butt(given that the butt is not curved). If you imagine laying the long leg of a square on the rib, the 90-degree angle defined by the square would be pitch. This angle can obviously be greater or less than 90 depending on the shooter’s preference or the gun’s intended use. Typically pitch is adjusted for guns that will shoot driven birds; all overhead shooting where the gun is pointed primarily up, vs rough shooting where shots are out in front of the shooter. Pitch can also be adjusted so that the toe of the shotgun does not dig into a shooter’s chest. Shooters with fuller chest dimensions will oft times complain about this digging of the toe.

    LOP is important because it determines the geometry of the shooter’s arms. A short LOP will ‘chicken-wing’ your arms; the angle at your elbows being very acute. A long LOP will open up the angle of your arms and in extreme cases even straighten out the arms. The goal here is to adjust the LOP to create a proper geometry between the shooter and the shotgun or rifle in question. There is of course a sweet spot where the shooter’s arms are comfortable and provide the most stable and controlled connection between the gun and body.

    LOP is addressed by companies like Rizzini and others who typically include a basic thin wooden or black butt plate with their guns. The idea behind this is that they leave as much stock wood as possible by only adding a thin pad. Then the shooter can add a 1” or larger recoil pad to increase LOP or cut the stock down and add a pad to decrease LOP. Other instances like youth guns for example typically have shorter LOP to fit youth shooters.

    Two other primary stock dimensions are drop and cast. Drop addresses the relation of the comb to the rib up and down, where cast determines the relation of the comb and rib left to right. Drop on a stock comes in two (sometimes three) measures, and they are usually listed in order from the nose or most forward part of the comb to the heel. The measurement is actually the distance from the line defined by the rib (and parallel to the bores), to the spot on the comb being measured. One can get rough dimensions of drop by placing a shotgun upside down on its barrels(and thus the rib) and taking the measure from the comb to the tabletop. These measures are complicated by Monte Carlo stocks with elevated cheek pieces, which sometimes have drop measures for each end of the raised cheek or Monte Carlo piece, as this is where the shooter’s cheek contacts the stock and in effect is the important factor in drop. Proper drop will position the shooter’s eye in line with the rib. Too much drop and your eye will be below the barrels and when your face is properly against the stock, you will be looking at the breech of the gun. Too little drop and you will be looking down at the rib, seeing the entire length of it while shooting.

    Too much drop requires the shooter to lift their cheek off the stock to appropriately sight down the rib. Though this can be done, it is no longer in vogue. The old style of head-held high shooting has gone by the wayside as folks have moved into more modern styles dictated by sporting clays and other shotgun sports, though this old shooting is immortalized by our favorite shooting artists in many of their classic pieces. Too little drop is very hard to adjust for because you can’t ever get your eye properly in line with the rib, so the gun will always shoot high.

    Cast in a stock is dictated by the shooter’s dominant hand/shooting side, and by their physical appearance. Guns can be cast on or cast off. I always remember it (I am a right-handed shooter) that when I mount a gun, a stock with cast ON will be ‘on me’ or closer to me. A gun with cast off will be ‘off me’ or away from me. When one sights down the rib of a gun from the muzzle (a double-checked unloaded and safe gun) standard stocks will generally be neutral cast; the comb aligns with the rib. Guns that have cast will either have the comb of the stock to the left or right. This is in effect a slight bend in the stock that generally happens in the wrist. This bend could be just that, an actual bend where the stock was steamed and put into a fixture to impart the bend, or shaped into place when the stock was made by a stockmaker. This cast is typically given as a single measure taken from the comb, but again there can be measures for the cast at the heel and toe. A cast difference between heel and toe can dictate a twist in the stock. Again, for fuller figured folks, a gun with the toe cast further off than the heel will help eliminate uncomfortable toe digging into the chest.

    Typically a gun with cast off would allow better alignment with the right/dominant eye and the rib. When you lay your cheek on the comb, your eye typically is offset to the line of the comb. For a right-handed shooter the eye typically lands a bit to the left of the comb, and a bend ‘off’ or away will allow the eye to come back to the center of the rib. This bend keeps the shooter from having to roll their head over the stock to get proper eye alignment. Cast on is generally the proper dimension for a lefty. Though all of these are generally speaking. Righty shooters with fuller faces need more cast and those that are skinnier, need less and so on.

    There are additional dimensions and features of gunstocks if one wants to dive into the minutia of detail. For most though, an understanding of these basics should help the next time you are considering a gun purchase. And of course, like patterning your shotgun, the effectiveness of shooting skeet chokes, or the cadre of other things I harp on, nothing can replace a gun fit done by a professional. Even if you don’t plan on having a stock made for you or having one bent to your specification, simply knowing your dimensions may help tip the scales the next time you are faced with the age-old question of whether to buy or not to buy that old shotgun.

  • Josh Loewensteiner is a lifelong firearms enthusiast who began studying, collecting, and shooting guns with his father and brother when he was just eight years old- he has been studying firearms for nearly 30 years. He particularly enjoys the classic American sporting guns. Josh is a Life Member of the Parker Gun Collectors Association, a Life Member of the NRA, a member of the Lefever Arms Collectors Association, the L.C. Smith Collectors Association, the Colt Collectors Association, the A.H. Fox Gun Collectors Association, The Smith and Wesson Collectors Association and the Winchester Arms Collectors Association.

    Josh spent years working at some of the premier auction houses in the nation where he was immersed in fine firearms before striking out on his own to become a firearms dealer and consultant. Joel and Josh talk about their history with fine guns, the nuance and theory of collecting guns, how firearms auctions work from an insider’s perspective and so much more in Episode 27 of The Gun Room.

  • It is, at times, easy to take for granted the complexity of manufacturing involved in creating a fine sporting rifle or shotgun. As hunters or shooters, finding a gun that fits, breaks clays or hits birds is foremost in our mind. As we dive into and explore the construction of modern guns, we quickly begin to see a great diversity of techniques developed over the last 200 years or so that illustrate just how much thought has been put into the construction of the shotguns or rifles we love. Im Joel Penkala and this is 10 Minutes on Double Gun Barrels

    With the exception of double rifles, which fall into the larger category of ‘double guns’ a vast majority of modern rifle barrels are fitted to their actions via barrel threads. The threaded barrel is similar to a screw that threads into the same pitch threads in the action. A gunsmith will painstakingly cut these threads until proper headspace, or fit between action, bolt, and barrel is achieved.

    Double guns are in general manufactured differently, although there are always exceptions. Break action doubles like your Beretta 686, Parker, or Holland and Holland double rifle all have barrels that have been joined together without threading a barrel.

    In terms of geometry, if we think about any gun with two barrels, it may be a first intuition to think that the bores are parallel; perfect to one another. This is in fact not the case. For both double rifles and shotguns, the barrels are laid such that the trajectory of the bores crosses downrange at some specified distance. This convergence allows a single targeting sight plane to function for both barrels. In terms of double rifles, this is exceptionally important, and ‘regulation’ of these guns is perhaps one of the most mythological and mystifying procedures I have heard folks speak about in the gun world. There are very few folks in the states that will even take on the task of regulating a double rifle, the process of ensuring a proper cross at a specific distance with particular ammunition(side by side or over/under).

    Needless to say, joining double gun barrels happens in two ways, but terminology first. The breech end of the barrels is commonly called the breech bloc or lump, though the ‘lump’ or ‘lumps’ may refer to individual surfaces that lock an action shut. What I will refer to as the lump or breech bloc contains the lockup surfaces, ejectors/extractor channels, the breech face, and all associated elements. The lump can be created from a single solid piece of steel without barrels connected. Barrels are added after machining the lump by sleeving and braising. Or the lump is formed during the joining process. That is to say that each barrel contains a block of metal on the breech end of the barrel half the size of the lump. Those blocks of steel mate together when two barrels are joined and thus the lump is formed. In this case, the lump is machined after the barrels are joined together. In some cases, the barrels are separate pieces and a third piece is joined to create the lump illustrating the diversity of manufacturing possibilities.

    Mono-bloc barrels are formed by machining the chamber portion or lump from a single solid piece of steel and take advantage of modern precision engineering and manufacturing techniques. The biggest advantage is allowing the complex (and very co-dependent) angles to be machined into the action with a high degree of accuracy. The final fitting required on a mono-bloc gun is typically less than others. These guns can usually be produced with less final hand fitting making them less costly.

    There are two styles of joining barrels that utilize full-length single-piece barrel + lump construction. Demi-bloc and chopper lump barrels both involve joining two halves of the barrels, top and bottom for an O/U and each side for the side x side, to make the barrel set. Demi-bloc barrels utilize a male/female dovetail to mate the two barrel halves. Chopper lump barrels simply mate two flat surfaces in the action end of the barrels to form the lump. Shoe lump or through lump barrels are a third option where two full-length barrels are joined with a third machined piece that contains the ‘lump’ or ‘lumps’. Demi-bloc and chopper lump barrels are oft times confused with one another and a host of marketing folks has helped to confuse the topic more by calling one the other and so forth.

    When considering the pros and cons of each of the above, it is commonly accepted that Demi-bloc barrels are the strongest being made of only two full-length pieces and joined by a dovetail. Chopper lump barrels were developed heavily in British guns and produce the thinnest and lightest barrels while maintaining strength. They are also the most time-consuming and difficult to produce but considered the finest in construction. Through lump are common in American classic doubles that we all know and love, thought this and shoe lumps generally tend to be wider and heavier construction. Finally, so many modern guns take advantage of CNC machining technology and utilize the faster production process offered by mono-bloc barrel construction, particularly in over/unders.

    As with dog breeds, E-collars, and upland vests, each has its own benefits, each its own detractors. All of the above-described methods of manufacture have produced successful, strong, and well-built firearms though there are some clear winners in terms of strength and time/cost of manufacture. For those wishing to dive into the depths of shotgun technica, hopefully, this illustrates the complexity of a potentially seemingly simple topic like slapping two barrels together.

  • Ron and Joel talk about the summer's events and the upcoming season. We recap some fun times at the Southern Side by Side shotgun event and cover topics ranging from NAVHDA to drilling combination guns, and the status of game birds in New Jersey.

    Ron Boehme has had a passion for bird hunting since 1973, when he bought his first license to chase pheasants in his home state of Illinois. Since that time, he has hunted in 22 states and 3 provinces, mostly with a bird dog by his side. A move to Michigan allowed him to build his kennel, Dancing Duke Kennels, and begin a lifetime membership with the North American Versatile Hunting Dog Association where he is currently a Senior Judge. Ron is currently ranked 39th among the top 10 wingshooters in the country.

    Come join us for Episode 25 of The Gun Room!

  • It’s got awful nice wood for a Fox B I said to my dad. There is always a gun that he has, or one that I have, that the other wants. In this case we were hashing out the finer details of a swap that involved a Winchester 101 and a Savage Fox B(16ga, single trigger) with awful nice wood to boot. I wont get into the nitty-gritty of who came out on top in this particular trade, rather, I'd like to address my own almost involuntary comment regarding the character of the wood on the gun. This is 10 Minutes on gunstock wood.
    Wood has long been one of the best ‘strength to weight ratio’ materials at human disposal and so has been and is still used preferentially for building of all kinds. It makes perfect sense that wood was chosen to be the buffer between man and metal where guns were concerned. Above all things the gun stock needs to be functional and in the parlance of gun stock speak, functional means strong enough to endure the beating regular use implies.

    In the most basic terms, trees grow by adding layers upon layers, building out from within and up from the ground. This is why fences stapled to living trees don’t end up, well, UP. If a tree grew up, the fence would be carried with it and away from the ground. This is the best example I can think of to illustrate the nature of tree growth and one that helps with the perception of grain in wood. Each year, the tree adds a layer. These stacked layers become the grain in the wood. Layers are added sequentially on top of one another until our tree is selected to become a gun stock.

    If only it were that simple. Layers are added each year, but trees do not add layers equally. We have all seen a tree bend to grow toward a light source, twist, arc, fall and then curl back up again. Layers are added based on chemical changes in its response to (primarily) light or lack thereof. Additionally, trees do not all grow in the same locations; trees that grow on the sides of mountains have it ‘harder’ than trees that grow in a lowland along a river. From a tree-centric perspective, deep nutrient-rich soil is better than the rocky hillside of a mountain with its shallow soil and minimal nutrients. Location-specific issues on a smaller scale are not the same as regional variation. If you have ever planted a garden, you know that your seed catalog splits all crops regionally, based on climate segments. This is why when you bird hunt in northern Montana crops are wheat and beans, and as you go south there is more corn or canola. These crops, just like trees, ‘prefer’ a specific set of conditions, growing season, rainfall, etc. to experience optimal growth and production.

    So how does this factor into a gun stock? All of the above is to illustrate that not all trees are created equally, and even within a species of tree, each tree has been grown in a specific region and location. Each of these elements(and more) dictate the grain of the wood and as a result the outward physical appearance.

    Gun stocks are typically made of walnut (with the most notable other option being maple). Walnut is a hardwood, broad leaf tree, that exhibits exceptional strength and typically dense grain. The latin family name, juglans, has 21 species (according to Wiki) with black walnut(J. nigra) and english walnut(J. regia) being the most commonly used for gun stocks. There are many names for the varieties of walnut used in stocks like French, English, Turkish, Circassian, Claro, Bastogne, California and Black. To cut through the haze in nomenclature would require more words than this article allows, but know that these names either refer to a specific species or a physical location where a specific species of juglans was grown. An example being that English Walnut is J. Regia. French Walnut is also J. Regia but grown in France.

    With location and species sorted out, gunmakers need a way to describe gun stocks from the perspective of aesthetics. We can pick out pieces of Turkish Walnut that have appropriate grain patterns to produce strong functional gun stocks, but within our subset of Turkish walnut with good grain, there must be a way to differentiate the aesthetic qualities of a stock blank. Enter the myriad of stock grading systems that have been developed to attempt to put a quantitative measure on something that I would argue is rather qualitative/subjective.

    The features in gunstocks regarded as aesthetically pleasing are similar to those in other schools of woodworking. Fiddleback, a phenomenon where closely grown layers of curly grain reflect light in waves, is revered in furniture and instruments as well as gun stocks. The collective term for these ‘imperfections’ in gunstock blanks is figure. Figure is described in many ways such as curly, ribbon, wavey, ropey, swirly, or wild. In gun stocks, the amount of mineral lines(dark lines caused by differences in soil mineral content), the waviness or curl of grain, and presence of burl all affect the appearance of the wood. Highly figured stocks receive higher grade values.

    Grading systems use letters, numbers, or nomenclature to attempt to describe the percentage of a stock that contains figure. Standard, semi-fancy, fancy, extra fancy, and exhibition is one such set of delineations. Typically there is a standard grade, and 4 types of grade above that represent 25, 50, 75 and 100% figure respectively. Grades that use numbers(or roman numerals) would run as Grade 1 or I for standard, increasing in number up to Grade 5 or V (and up). Letters might start with A and run up to AAA or X to XXX, (and up). Additional terms like Royal, Crown, Presentation or Best are all thrown in for additional spice.

    The take-home is no single system is in place that unifies all stock quality grades. Stocks are placed on subjective scales that vary from company to company. It is worth noting that stock grades may or may not account for the actual STRENGTH of the stock - IE the wood grain that runs through the grip area. This is arguably the most critical portion of the stock as it will experience the most stress and is also typically the thinnest area of the stock. Grain that runs along the grip, curving to match the natural shape of a pistol or round knob, or that flows straight through the length of an english stock is imperative. This is why looking beyond the ‘pretty’ aspects of figure is so important.

    So what does this all mean? Without trying to be cliche, beauty is in the eye of the beholder. Some folks might love burl wood and ‘birds eyes’ in their stocks while others prefer the buttery look of French Walnut, still others want the classic American Walnut feathering found in so many Winchesters. My suggestion is to always take a look at the grain of the stock in addition to its outward beauty. When selecting a blank, ensure that you look at both flat sides of the blank as well as the top and bottom. Getting a look at the grain on all sides is the best way to ensure you have a strong stock blank to start which will yield the best-finished gun stock. Some of the most figured and unique blanks I have seen have only been fit to stock a boxlock shotgun simply because the boxlock stock design is inherently more sturdy than a sidelock and those pretty blanks would simply have cracked or broken otherwise.

    For my own experience, I should have slowed down and looked at the grain on the Fox B stock, but like so many others, I find it easy to be seduced by the beauty found in the wood. Lucky for me, the stock looks pretty AND has good grain through the grip. My biggest suggestion; don’t rely on luck like I did and check the grain the next time you consider a shotgun or stock blank.

  • CPA Rifles of Dingmans Ferry, Pennsylvania specializes in creating some of the finest single-shot rifles in the world. Founded by Paul Shuttleworth in 1986, CPA rifles offers reproductions of the Stevens 44 ½ action single shot falling block rifles, as well as customizations of other similar guns. Paul established the business but Gail, the third of 4 children, joined the family-owned operation in 1997 and has taken a hands-on approach in everything she does at CPA. Gail is an accomplished and lifelong shooter and is as proficient in the shop as she is on the range.

    Gail and I sit down in the shop at CPA to discuss single-shot rifles, the history of Schutzen, and black powder silhouette. We take a look at what a small gun production facility looks like and how a CPA can thrive on a “quality over quantity” business model. Join us for this exciting and in-depth look at a family-owned firearms business and so much more on Episode 23 of The Gun Room.

  • I have always been fascinated by the depth of knowledge required to be a proficient gunsmith. Skilled individuals possess a working knowledge of mechanics, engineering, chemistry, and economics(if they are still employed), and can pull from any of those topics at will. Today’s topic in question, heat treating metal, requires one to don the hat of chemist and engineer with the study of metallurgy. I’m Joel Penkala and this is 10 minutes on heat treating and case hardening.

    Gunsmiths have to shape parts from metal, and not all metals are created equal, nor will one type serve appropriately in every situation. There are parts in guns that need to be very strong like firing pins while others like springs need to flex. Still, others require exceptional wear properties like hinge pins, where there is metal-to-metal contact. These properties are generally referred to as hardness, strength, and stiffness. Hardness deals with surface durability. Strength with the amount of stress that can be applied before a part fails, and stiffness the ability of a part to return to its original form. The properties of a specific gun part will dictate which of these characteristics are required.

    Over the last several hundred years man has been improving the field of metalworking, in no small part with the help of modern technology, machinery and production methods. More consistent and complex alloys can be created now than ever before. And modern machining allows parts to be made in metals that already possess the necessary properties that a final part may require. In the past, this was not so. Gunsmiths had to make do with techniques and materials at their disposal to create firearm parts, and so needed to be good at changing the properties of the metals they utilized.

    It may be overly simplistic to say that it is easier to shape soft metal. What I mean is, it is easier to shape metal when it is soft, instead of hard. But hard surfaces may be required for durability. Metals can have properties that make them so hard that even a high-quality file will seem to slide across without removing any material, which would make them very difficult to shape indeed.

    Enter the process of heat treating metal. In its most basic terms, a process of heating and cooling metal to alter its properties. Temperature, time, and the presence of other materials like carbon, will dictate the final properties of the metal; the very things like hardness, toughness, spring-like character, or brittle nature required by varying gun parts.

    One type of heat treating is ‘tempering’ and is crucial to the production of springs and other gun parts. Untempered steel can be very brittle, and the process of heating the metal up to a specific temperature can change that brittle steel into something more spring-like. The duration of time the metal is heated, the temperature to which it is heated, and the speed with which the part is cooled determine its final properties. If you hear a gunsmith talking about heating up a piece of metal to a straw color, or flame blue, that is tempering. This process can also impart color to polished metal. This is most often used for small parts- like Screw heads which can be flame-blued to produce a fine electric blue to purple color that is very appealing on certain guns.

    Another heat treatment process that we hear a great deal about in the gun world is that of ‘case hardening’. The case hardening process was used as a finishing technique on many firearms over the years, and produces what is generally referred to as case colors. If you look at gun’s for sale ads, I am sure you have come across one that refers to the percentage of case color left on an action.

    Carburizing is the process of heating up a metal part in the presence of extra carbon. In the gun world, this is referred to as case hardening or color case hardening. For firearms parts, extra carbon typically comes from a combination of charcoal and bone, and you will often hear of bone charcoal case hardening. Without diving too deep, the metal is heated up enough that it begins to absorb carbon from the surrounding carbon-rich charcoal. The additional carbon enters the crystalline structure of the surface of the metal, and when cooled, or quenched, the new structure possesses more carbon making it harder. This change only occurs on the surface, while the bulk of the interior characteristics of the metal do not change. Essentially we can have a piece of metal where the properties are not the same throughout, ie a tough surface finish over a softer yet less brittle interior. It also happens that a side effect of this process is the production of those oh-so coveted case colors we are so fond of.

    Bone charcoal case hardening takes a good deal of time, with parts needing to be carefully packed into a bath of charcoal and heated carefully up to the neighborhood of 1300 to 1400 degrees F. The resulting shell of hardened metal can be as much as 0.060 of an inch deep. The main drawback is that parts are heated to such a high temperature for so long, they are prone to distortion, warping, or cracking. Most actions, for example, are fixtured to metal blocks during the process so fragile top and bottom tangs remain true to their original shape.

    I mentioned above that improved metal alloys would play a role in this discussion, as would modern machining techniques. The steady march of progress has given us other options to produce the hardened metals we need for guns, without packing them in burned bones.

    Modern gun manufacturing can take advantage of high-quality alloy steel. Production with modern equipment allows for the machining of gun parts that are made from steel that already possess the necessary qualities of hardness sufficient to meet the needs of firearms, and thus the only goal that remains is to produce the ‘colors’ part of the process. Chemical case coloring achieves this goal. Metals are heated up in a bath of chemicals and then quenched in an aerated tank of water or oil. This process gives the metal the case colors that so many folks love. Contrary to what some may think, this chemical process does harden the outside of the metal and typically produces a harder surface than the bone/charcoal method, though not as deeply penetrating.

    Both types of case hardening will alter the metal, and produce colors, though the tones, specific colors(yellows, purples, blues, and reds), patterns, and shades from the processes do look different. Any colors on a gun in either process are very susceptible to wear. The ‘colors’ are only an oxidized layer on the very surface of the piece and can accidentally be removed with chemicals (just like bluing on a barrel), or too much scrubbing with steel wool. This is why so many modern manufacturers are applying some type of clear coat over top of their case colors to make them last.

    Lacquers and similar clear surface coatings can be applied after the heat-treating process to provide another physical barrier to protect colors. Taking it to the next level, the application of baked-on coatings like Cerakote provide yet another more durable finish to help case colors last. Cerakote is a ceramic polymer coating that is applied via spray gun a few thousandths of an inch thick and baked to adhere. Generally, it creates a durable, abrasion, chemical and corrosion-resistant surface. It is available in any number of colors and used throughout the gun industry, though the application of clear Cerakoe over case colors provides a durable alternative to the colors alone, ensuring they last longer.

    I personally have used a torch and some cold blue to produce colors on my first ever gun restoration project, a single shot 20ga. and applied a clear spray on the finished action to try to get them to last. You can learn to do just about anything these days from a youtube video or an online forum, although I do believe that Brownells Gunsmithing Kinks book had a section about the same process. Anyway, these types of chemical colors are just that; simply chemicals applied in the presence of some heat to give the metal something that has the appearance of case color. It’s not bone charcoal-colored, or chemical case hardening, and is not even hardening at all. Much like Steven Rinella’s comments about hunting big deer inside fences, the only reason that these ‘fake colors’ have any value at all, is that the real McCoy classic bone charcoal colors are so rare and beautiful, and also so ephemeral. Case color disappears with use, is hard to replicate, and is a good indicator if a gun is original or restored. I suppose that we are all looking for our own big buck of sorts and sometimes we all succumb to shortcuts from time to time. But then again, for my single-shot squirrel gun, it seemed a fitting choice to make the metal look new and pretty again. I’ll leave you with that, Im Joel Penkala and this is The Gun Room.

  • The 2021 Barret Jackson Auto Auction in Las Vegas was one to remember. With a record-breaking $48 million in sales, it would seem that there is quite a market for unique automobiles. It has always intrigued me that in the auto world it seems that the items of the highest auction block value can be relatively new production cars or just as easily classics from 70 years ago. In this most recent auction, three wildly different autos broke the 1 million dollar ceiling. They were a 2015 Mclaren P1, a 1957 Mercedes 300SL Roadster, and a 2019 Ford GT. All amazing vehicles, feats of modern engineering and technology, lovingly cared for, and I’d imagine prized possessions of their owners. I am Joel Penkala and this is 10 Minutes on the Philosophy of Gun Restoration.

    You might be saying, what’s this got to do with guns, but bear with me. From what I can gather, the McLaren and the Ford GT are likely original condition vehicles. The GT had 21 miles on the odometer so that’s a safe bet. The 2015 McLaren probably had more miles, but chances are it was still near original. Now we come to the 1957 Mercedes 300SL. The Mercedes, though a stunning original example, is clearly no longer in original condition. I pulled a bit from the write up on the auction website

    After a careful mechanical overview, new sway bar bushings and new motor mounts were installed, and the brakes were serviced, cleaned and adjusted. During the brake inspection, it was noted that there were no leaks and correct materials were used during restoration. Finished in the iconic 300SL color combination of DB 180 Silver Gray Metallic with a red leather interior. The silver paint was mixed with the correct metallic flake and was uniformly applied. The finish remains glossy and smooth with only light signs of use since the restoration.”

    I would argue that based on this single example (forgive the small sample size) that restored vehicles can and do command attention and dollars on the auction block. It seems though, in the world of classic firearms, a “restored” version commands a different value than one in “original condition” even if “proper finish and the correct materials” are used during restoration.

    I’ll admit that I am looking at this question of gun restoration from the ruby lens of my own experience. I got into gunsmithing and have spent countless hours performing restoration services on my own guns. Dad and I were always looking for a ”gunsmith special”; a shotgun or rifle that was abused and misused, but still had the potential to be brought back. This desire was motivated by our own financial limitations, or I should say my financial limitations restricted what I could buy. Any gun in high condition was hard to justify. Not to mention they did not afford the opportunity to do what it was that we set out to do- work on guns. Tear them down, learn how they work. Fix parts, replace parts, make parts. We endeavored to find a project that represented a challenge and pitted our own abilities (pun intended) against these relics relegated to the parts pile.

    It would be hard to condemn us for what we did. The majority of our projects were inoperable, sold to us as ‘parts guns’. More than once I had to sign a paper that stated that I would not use a gun I was buying until I had it looked at by a competent gunsmith. But, in my reading, I would come to find that there was a contingent of folks in the gun world that seemed to question the philosophy of restoration. If they didn’t, why was it so important that a Parker I looked at on gunsinternational was a “DelGrego restoration”. And why is that restoration deemed less valuable than an original gun?

    Perhaps I am a victum of my own desire, creating my own reality so to speak. I know that even in those early days I could recognize a ‘hack job’ garage special. A replaced forearm that is clearly not to original spec. Maybe made of maple instead of walnut. Or an action that has been blued where the original was case color- or worse, spraypainted black. I’d like to think that the work we did was at the very least, in the image of the guns original condition. Sure I didn’t have the ability to case harden the action on my single shot 20ga project. It was early in the Dad and Lad gunsmithign days, and heat treating was beyond our abilities at the time. Even still, we determined how to chemical color the action using some heat and products at our disposal. Is it truly original? No of course not, but the results provided created a gun that is far more pleasing to the eye.

    I have had the opportunity to hold a number of restorations, from a variety of talented folks. I do believe that if a restoration is completed in a way that remains true to how the guns were delivered from the factory, there is merit to this work. There is so much nuance to this process though, starting from knowing exactly what a gun looked like, from the factory. What shades and colors were produced by factory case hardening? Were the patterns striped or blotchy? Were the barrels a deep dark blue or were they more black? Shiny or a bit dull? What checkering patterns were used and what lines per inch were they?

    I am as guilty of this lack of knowledge as any other hack job garage smith. I don’t necessarily know what the gun looked like when I start my work. Perhaps this is because I understand that my work will never be a true restoration in that sense. I am in the business of bringing a gun back from the grave. Perhaps, with a lifetime of practice, I could hone my skills to the level of factory original. At this point in time, I don’t have the desire or inclination to replicate the work of the original craftsmen. My restorations are my own and will carry my mistakes and lack of abilities along with them.

    A field grade LC Smith, 12 gauge, with no case color, little blue, and checkering so worn that the lines are nearly gone carries little value. When the gun came to me it was inoperable. I am in the process of recutting the checkering, and to be honest, rather than sanding off what is clearly non-original lines, I am simply chasing what is there. This would be a travesty for some folks, and so it may be. It is my belief that this gun might have had a worse fate if it had not landed in my hands. A restored field grade LC does not carry the value to justify the cost (aka time) to do a proper restoration. Unless of course, the gun carries other value- sentimental value most likely- that might justify the expense.

    In my time working in a gunsmithing shop, there were several guns that came to us needing copious amounts of work, that would far exceed the value of the gun- restored or not. It was my job to explain to those folks that they were on the losing end of a deal, and to do so gently so as not to offend anyone’s sensibilities. Typically the discussion would go about as I have laid out so far though the x-factor was always the history with the gun. Was it your fathers, or grandfather’s? Had it been handed down over many generations? I saw guns that had been damaged at the hands of their current custodians. The guilt of damaging a family heirloom is a strong motivator to open one’s wallet and spend the money required to make repairs.

    History and provenance always factor into perceived value. The Mclaren sold at the Barret Auction was owned by Deadmau5, a very successful DJ. I am sure that the celebrity history of the vehicle added to its value. The same way that a particular F Grade AH Fox Shotgun could sell for a whopping $862,500. Now, at the time of this podcast, William Larken Moore has a very fine 12 gauge AH Fox FE for sale- a Philly gun made in 1907. It’s likely that you guessed what I am driving at- the difference between these two guns mechanically may be small, but the difference between these guns owners is very large indeed and reflected in their price. I suspect that the William Larken Gun was never owned by Teddy Roosevelt.

    For fun, I looked at the most expensive Fox on Gunsinternational. A $64,000 12 gauge Fox made for William Gough, serial number 6500. William Gough was an engraver himself and an engraver’s son. He worked on Fox, Parker, Winchester, Remington, Marlin, Colt, Meriden, and Aubrey and is a celebrity of note in the gun world. The most interesting thing about this gun though - it is a copy. It has been upgraded and made to look like the original gun. This is noted in the Gunsinternational listing but brings up the not so pretty topic of fakes, imitations, humped-up guns. The underbelly of the gun world- and the art world, fashion world, car world, and so on. I do believe this is part of the issue folks have with restorations. For all but the well trained, a gun can be made to look original, or more than original, a Field Grade gun can be upgraded to a lettered grade. Or as is the case here, upgraded to mirror a gun with history- with provenance.

    And herein lies the bigger issue with restored guns. Its a catch 22 of sorts. A good restoration is one that brings the gun back to its original condition- as it was the day it left the factory. And the best restoration may pass as an original. The problem is when people take advantage of the fact that restorations can be done so well, it is nearly, if not completely impossible to tell the difference.

    It is worth noting that in Europe, particularly in England, it was commonplace to send your gun back to the maker for upkeep. They did not call this a restoration- primarily because the gun was returning to the maker- the original manufacturer - for reapplication of the original finish. Barrels were rebrowned or reblacked. Stocks were attended to- dings and dents steamed and removed, checkering pointed and oil finishes reapplied. Although I am sure there are original examples of guns from across the pond, it is clear that most guns were cleaned up over the years and the view of what it meant to have a gun in original condition is rather different than here in the states. Most guns here never made it back to the factory for refurbishing- either because the service was not offered or because the maker was no out of business.

    The complexities of the collector gun world abound. Original, restored, or upgraded, with provenance and celebrity status or not, guns like cars will always have a value that is not simply based on their mechanics. Upgrading a gun may be a gateway to have a facsimile of an original, at a fraction of the price, although like many human endeavors it is when nefarious intent clouds one’s vision that this practice goes off the rails. It is one thing to upgrade a gun and represent it as such. It is completely different to upgrade a gun and/or knowingly misrepresent it as original.

    The world of firearms restoration is multifaceted, the idea of upgrading guns even more so. I believe that there is certainly a place for firearm restoration. The idea of bringing something back to life appeals to those of us who enjoy shotguns and rifles both in the field AND when they are apart on our bench. Not to mention the joy I find when I hunt with a gun that I have restored to function. There is something special in those moments afield, which for me, have been inextricably woven into the fabric of my life.

  • Coming to you from Dauphin, Pennsylvania, I have the opportunity to sit and talk with Sean and Liz Delaney of Delaney and Sons. Delaney and Sons is a family-operated travel business with a focus on hunting destinations. Their offerings focus on driven shooting in the classic locations where the sport was developed. In addition to a few Stateside shoots, trips to Wales, England, Scotland and Spain round out Delaney’s offerings. Our conversation stretches from the history of driven shooting, through to the modern-day, covering topics from what a driven shoot is, to the clothing, guns, dogs, and people involved. We discuss the famous Scottish McNab, as well as the differences between grouse and pheasant, and how to decide what shoot is appropriate for you. This and so much more on Episode 19 of The Gun Room.

  • Episode 18: Browning Auto-5

    Part of why I love old firearms so much is the history and romance that goes along with each particular gun. Many old firearms evoke feelings of nostalgia, memories of loved ones, and good times long gone. Is it the smell of a particular gun oil, or the lines of a gun that will spark these fond memories? I know people who grew up knowing only that grandad had a side by side- all they could remember was the shape of the gun. Then and now there are many side by side shotguns, which does not help identify WHAT side by side he had. For the topic of today’s discussion, shape was everything. I am Joel Penkala, and this is 10 minutes on the Browning Auto-5.

    At one point in time, if you saw a gun shaped like a 1911, it was a Colt- an iconic gun in its own right and easily identifiable from other pistols of the day. Now, the Colt has been copied and remanufactured by so many makers that the shape no longer dictates the maker. For the Browning Auto-5, this is not the case. If you see an old shotgun with a squared-off receiver in the back, chances are its an A5. And even if its not a Browning A5, its a clone made when John Browning licensed his original design to Remington or Savage. And, far fewer of those versions of this classic autoloading shotgun were ever made.

    The A5 was one of John Browning's pet designs, which he regarded as one of his best. The Auto 5 was a 5 shot, semi-automatic shotgun, meaning that the cycling of each new round into the chamber was the result of capturing the energy from the previous shot. The idea might seem mundane to us these days as there are so many modern auto loaders on the market, but back when Browning invented the A5, it was the first shotgun of its kind, and one of the first semi-automatic guns commercially viable as well(rifle shotgun or pistol).

    It was in 1898 that John Browning set out to develop a semi-auto shotgun (the same year the Mauser 98 was developed which is food for thought that they were still perfecting bolt action rifles when Browning was coming up with an autoloading shotgun). Browning was said to have devised several versions of the auto to test, but he and companions settled on the long recoil version of the design as the most feasible.

    Unlike many of todays autos, the A5’s barrel moves along with the bolt during the normal cycle of operation. 4 shots are placed in the magazine tube, below the barrel, and one is put into the chamber. The gun is fired and the resulting force pushes both the barrel and bolt rearward together as a unit. Once at the end of their rearward travel, the bolt is held back by a mechanism attached to the rear of the lifter, while the barrel is driven forward by the large spring around the magazine tube. As the barrel moves forward and clears the spent case, it actuates both the ejection of the case, and initiates the lifter to raise the next round into position. The mechanism on the rear of the lifter releases the bolt, allowing it to move forward and bring the new round into the chamber in the barrel. There is a great video online- check it out- as I suspect my description here is likely a bit hard to follow unless you have recently taken apart an A5.

    The distinctive lines of the A5 are a result of needing to enclose all of the above inside the action. The Auto-5 has an aesthetic all its own. The top of the receiver is flush with the barrel and terminates at nearly a 90-degree angle at the back of the action. This angle drops down to where the stock lines meet the back of the action giving the rear of the gun a squared, yet still rounded look that can be seen from across a duck marsh or corn field earning it the name the Humpback Browning.

    One of the most innovative features of the A5 was the friction ring system that John Browning designed so that the gun could accommodate a variety of loads. Any semi-auto mechanism driven by the pressures of recoil must take into account that each shotgun load has a different amount of recoil or rearward force. Heavy loads = more force. Light loads are less force. Design a gun for light loads, and the heavy loads will overpower the mechanism and damage the gun. Design for heavy loads and light loads will not have enough force to cycle the gun properly. Browning saw to this with a system of friction rings that are integral to the proper function of the gun. The rings could be stacked in different configurations over the magazine tube, and in front of the mainspring, such that they would increase or decrease the amount of friction applied during cycling, applying more when needed for heavy rounds. This elegant solution made the A5 a very versatile and reliable gun.

    Much like his other designs, John Browning had little interest in manufacturing his own firearms and so approached both Winchester and Remington to produce his latest gun. Winchester would not agree to pay Browning royalties on the gun, and complications at Remington prevented a deal. Having been down this road before, Browning approached Fabrique National (FN) in Belgium, who promptly agreed to produce the shotgun. The first A5s rolled off the line in 1902, with production continuing until 1975. In a seemingly very familiar fashion (think Weatherby Mark 5) the production was moved from FN to Japan, where A5s were produced at the Miroku factory until 1998.

    I mentioned before that Remington would produce the Remington 11, and Savage would have a crack at the gun in its Model 720, and though similar, these guns were slight modifications to the original Browning design. It is of note that Remington would produce A5’s during the years of World War 2 along side its Model 11’s, though once the war was over, production did shift back to FN in Belgium.

    The A5 I am holding is a bit of a unique one, although with 2.7 million made, it’s hard to believe that mine is special beyond my own curiosity. It is a 16 gauge gun with a solid rib. It is an early manufactured gun, made in the late ’20s, and is marked both Browning Arms Company Ogden Utah on the barrel and Fabrique National on the receiver. It is unrestored and I love the patina it carries. It shows proof marks on the bolt and action, which is something that I have always loved- maybe because it helps tell the story of a gun. The bolt and both largest screws on either side of the action are marked with the last three digits of the serial number; another cool feature of older guns when parts were made to fit THAT particular gun.

    My A5 also has the earlier style safety - it is located at the front of the trigger guard and slides forward and backward- rather than the side to side of later versions of the same gun. Although a curiosity at first, the more I worked the sliding safety, the more natural it felt. Not to mention that it positioned your trigger finger nicely for the trigger pull that would follow.

    Much like guns of the same vintage the Browning and its clones the Remington 11 and Savage 720 would see service on the battlefield and with law enforcement. US-marked guns were used as guard weapons and for trench warfare, and trainers were used to introduce the concept of lead for gunners trying to shoot down enemy planes. Clyde Barrow used a cut-down version of an A5 during the infamous crime spree of Bonnie and Clyde.

    The venerable Auto 5 saw far more use in the fields and woods and became a staple at deer and duck camps. Because the production of the A5 spanned so many years, versions were available from the factory in all three most popular chamber lengths- early guns were 2 ½” followed by the standard 2 ¾” and eventually 3” magnum. The popularity of the A5 led to the development of Light and Super Lightweight models, though very few of the Super Lightweight were made.

    A5 barrels came in several styles, including plane no rib, solid rib, and vent rib versions, and with a variety of fixed chokes. A5s would eventually adopt adjustable chokes, though not until later production years. Slug barrels were also available adding to the versatility of the gun.

    Browning has recently reintroduced the A5, and though the gun looks somewhat like the original, the internals are very different than that of the original long recoil version. I haven’t handled the new version myself, so until I do, I will hold off any comment on them.

    It is undeniable that the Browning Auto 5 has found a place in the heart and hands of sportsmen and women across our country. And if you are still unconvinced about the popularity and status of the A5- go ask singer/songwriter Evan Felker of Turnpike Troubadors how he feels about his grandfather’s Browning, or maybe just go listen to “The Housefire” by the Troubadors.