エピソード
-
CAD/CAM milling technology including CEREC is dying on the vine.
The march to 3D printed crowns is underway and if you get in on the front end of the bandwagon, you can save tons of overhead on your lab bills.
There are 3 Big Ways to 3D print crowns right now.
Listen up and catch the wave of the future before most dentists know what hit them.
Go to 3DPA.org for a free report:
3 Big Mistakes Most Dentists Make When they Consider 3D Printing
-
Some of the things dentists rave over as they add 3D Printing to their practice are really cool, but don't exactly move the needle when it comes to ROI.
Then, there are a small few that pay the way for everything else the super techy nerd gene that all dentists have (myself included).
Today we're going to talk about the procedures that will pay off your initial investment the fastest.
After you pay that off, you will have a lot of choices on what to do with the profit.
One of the best things I have seen is to lower your fees to patients so that both you and your patients have a big win from this.
Plus, you will be securing your practice by insourcing at a time when sending out labwork can be dicey to say the least.
-
エピソードを見逃しましたか？
-
You realize you need to start 3D printing.
You're busy. We're all busy. But...
You realize you need to start 3D printing for all the amazing reasons you're hearing and reading about.
What is the easiest and simplest way to start from absolute zero?
Here are the 3 simplest ways to start printing and realize the power of what it can open in your practice.
Get more free 3D printing resources at 3dpa.org
-
Case acceptance and case presentation problems are rampant in our profession.
Is it us or is it the patients who get in the way of them getting optimal care?
Maybe it's a little bit of both, but luckily things are getting easier.
3D Printing can break down some of the biggest barriers that cause "empty chair" syndrome.
After you listen to this episode you will want to go on over to the 3D Printing Association website and get our free resources to help you get started.
www.3DPA.org
-
Will we, won't we...
Are we going to have a recession, who knows?
The "Experts" all say we will. But, most dentists I know haven't seen it yet.
Still, if there was a way to improve your practice overall while securing your practice in the case that we MIGHT have a recession.
Well, that's what I call a no-brainer.
We've talked in the past about the Aesop's fable of the ant and the grasshopper.
This is a classic example.
Don't be a grasshopper!
And, while you're at it, learn these 3 awesome ways that 3D printing makes your practice even stronger when that pesky Recession hits.
If it hits.
-
3D Printing can be expensive enough when you're first getting started.
Why not use FREE software if it's just as good?
We think so, too, and this episode is dedicated to helping you make good and informed decisions as you start your 3D printing journey.
Visit us at www.3dpa.org for more 3D printing resources and to claim a copy of the checklists we use for our Top 3 3D printed procedures.
-
Same Day Service has been a buzzword in dentistry since the early days of the CEREC and milled crowns.
Until 3D Printing burst onto the scene in 2020, most dentists didn't feel like things like same day starts for clear aligners or dentures were possible.
Everything is changing rapidly and here are 3 ways 3D printing can make same day dentistry a reality like never before.
And, as a result, 3 ways you can increase case acceptance and gain your patient's trust.
-
I'm not only talking about only lowering overhead or reducing the need for more staff,
I'm talking about making the quality of your practice better.
Here are 3 ways 3D printing will do that.
Go to www.3DPA.org to get 3 FREE checklists for our Top three 3D Printing Procedures we use everyday in my practice.
Watch this episode on YouTube here:
https://youtu.be/vE_Z6fD3HoQ
-
Dentistry is always changing, but 3D Printing is speeding that up fast.
Learn 3 procedures that dentists do everyday that will be so impacted, that they will be changed forever...
And sooner rather than later.
Go to www.3DPA.org to get FREE checklists for our Top 3 3D Printing Procedures we use everyday in my practice.
Watch this episode on YouTube here:
https://youtu.be/NP6_gibD75M
-
There is a ton of buzz around the topic of 3D printing in dentistry today.
3D Printing opens the doors to ways that 3D Printing can help any dentist.
If you're just now starting your journey, or you are just now realizing there is something to this, don't worry...
You're not too late!
Here are 3 Big Reasons 3D Printing can positively impact you and your practice.
Go to www.3DPA.org to get FREE checklists for our Top 3 3D Printing Procedures we use everyday in my practice.
Watch this episode on YouTube here:
https://youtu.be/Sh0f2XBMXKM
-
A quick update on the No Surprise Act from the ADA and, then...
The main event.
An article from a hygienist explains how we can keep hygienists happy.
That way they won't quit and cut off the lifeline of the practice and such.
Every dentist should hear this one and then read the article for themselves.
You really don't want to miss this one!
-
Once again, dentists are caught in the crosshairs of more regulation.
While it seems it could have been worse, all of us will likely have to change some of our ways to stay on the right side of the law.
On today's Dental Headlines Show, we will discuss:
Which (Very Few) Dentists are ExemptThe Most Likely Area You Will Be AffectedWhat Seems Like the Most Commonsense Way to Approach these ChangesAnd More.
-
Dentistry in the News: January 7th, 2022
WHO finally recognizes SDF. What's on 2nd. I dunno who's on 3rd.AI is coming and where is Will Smith when you need him to fight a robot?Dropping PPOs is always a good idea apparently... DuhBonus points if you know what POSA is and what to do when you see it.The alphabet squad explains why mobile and teledentistry are good for everybody...And Much, Much More.
-
Dr. Tom Larkin is a professor and a private practitioner.
He has been screaming (well, not screaming, he's pretty soft-spoken) from the rooftops for years that we had to change the way we operated because it was just a matter of time before our profession would be changed forever.
Enter COVID19.
If we want to re-open and get back to any type of pre-covid normalcy, there are things that we MUST do right now.
IF YOU FIGURE THIS OUT, you will have an advantage over everybody else.
Oh, and the Elephant in the Room..... HYGIENE!
How in the heck are we supposed to deal with hygiene re-opening?!?
Well, it's at the 15:26 minute point, but don't skip ahead or you'll miss details you Must Have today.
Remember, we're all in this together!
You can visit Dr. Larkin's dental bootstrap project here:
www.PhoenixDentalProject.com
-
When this crisis if over, we must Restore our Practice, Remake our Systems, Rebuild our Dreams, and Reclaim our Future.
Note: you can watch this video in our Facebook group here
In 2013 I faced a similar crisis when my practice burned down overnight.
This lecture details the exact steps I took then to rebuild my practice
This is your opportunity and now is the time for all of us to "Burn Down" and failed systems that were already causing us pain and remake them perfect!
Remember, we're all in this together.
If you would like CE credit for this episode or watch the video of the lecture, go to our Facebook Group at www.facebook.com/solodentists
This is the community of solo and small practice owners navigating this crisis.
-
TOO BUSY TO LISTEN RIGHT NOW? GET THE TRANSCRIPT HERE
Dr. Amanda Wilson levels with dentists about what is going on in ortho today and with Smile Direct Club, including strategies to take them on and use their millions spent to boost your own practice.
Dr. Amanda candidly pulls back the curtain about what is really going on with the Purple People Eaters and the decline Orthodontists have seen for the past decade and a half.
After telling us what we should REALLY know about Smile Direct Club, she dives into how it's a No-Brainer that general dentists should be adding Ortho to their practices...
Then, she tells us exactly how to do it!
From wire braces, to Invisalign, to In-House aligners, and even White Label trays...
Dr. Amanda explains in detail how we can all save Two-Thirds of our lab case fees!!! WooHoo.
Any self-respecting general dentist who wants to add ortho to their practice (and you would be dumb not to want that) needs to listen to this podcast VERY slowly and take notes.
If you don't, you probably don't need to be doing braces anyway.
She gives us that many amazing tips, diamonds, tricks, secrets, etc. Tune In Now!
Go to her website to learn all about the special offer (truly a great one you shouldn't turn down) here:
www.StraightSmileSolutions.com
-
Jerry Jones and Dr. Chris Griffin unveil the #1 way to rescue dental practices under assault using memberships among other brilliant ideas.
Recently Jerry Jones released the shocking 6th edition of the State of Dentistry. He has researched every aspect of the current dental economy and interviewed the very best in our field.
His conclusions are startling and this post-report interview might even be better as he reveals the one thing that made his practice sell for more than it should have.
Any dentist can duplicate this winning strategy.
Listen in and take careful notes if you want the #1 way smart dentists are securing their practices even in these challenging times.
-
The Dynamic Duo of Erin Elliott and Tarun “T-Bone” Agarwal is fighting the status quo of how to practice and how to learn better than Batman and Robin teamed up to fight crime. Just exchange Raleigh, North Carolina for Gotham and you get the idea. Nestled in the Appalachians is one of the hottest learning centers in America and it’s not by accident. Whether it’s Dr. Erin’s Sleep 101 course or T-Bones 3D workflows, dentists who travel down to see them are never disappointed because these two give more than any student would expect.
Today, T-Bone challenges me on catching the wave of the future in private practice and Erin tries to keep him calm while adding her own 2 cents in a much less ‘in-your-face’ style that is uniquely her own.
Did they convince me to change my ways…
Listen and you’ll find out, plus much more like:
Why practicing non-solo doesn’t have to mean losing autonomyThe biggest reason why most dentists will never try to work in difficult procedures, like Sleep and 3D, and how a simple but effective hack would change thatThe trick to getting students to implement once they get home that almost nobody shares and why you probably don’t implement eitherAnd much, much more.
Enjoy
-
Elijah Desmond is the dental Super-preneur whirlwind who is famous, not for being a hygienist, or for co-founding DentalHub 360, or for co-founding Smiles at Sea, or Driven Dental Marketing….
Those things are cool and all, but Desmond is famous for being just a tremendous human being. This was evidenced over the holiday when I saw his video about helping an anonymous dentist who was struggling. I donated a little bit and I encourage you to as well.
If Desmond says it’s for a good cause, I believe him and after this interview, you should, too.
Here’s the link to his GoFundMe page
-
Today we interview Dr. Nathan Ho, new patient expert with a specialty in getting tons of amazing ‘real’ reviews. This is quickly becoming the number 1 way to get patients at a reasonable cost.
You can watch part one of this awesome interview on his Facebook Group, Dental Win Win.
You can also watch the Video Podcast of this interview on our new YouTube Channel.
- もっと表示する
