Played
-
Many enthusiasts want to build something unique simply for the sake of “being different”. And while that’s fine, different doesn’t necessarily mean better — or even good, for that matter. Morgan Clarke of MCD1 doesn’t have that problem, though. What he creates is definitely different… But it’s also very, very good.
Use MCD100 to get $50 off HPA’s Motorsport Fabrication Starter Package: https://hpcdmy.co/fabpackageb
Morgan Clarke isn’t your typical vehicle designer and fabricator — he tends to avoid CAD and 3D scanning, he doesn’t have any formal training, and he’s certainly had a rough road to get to where he is today — yet he’s a highly regarded and sought after builder in the world of offroad vehicles.
Starting his career in industrial fabrication, cars were only an occasional side hobby for Morgan. That is, until people in the industry started to recognise his design and fabrication talents and enticed him away from the boring 9-5 and into a motorsport-focused fab shop. Morgan talks us through his challenging journey from directionless troublemaker to the owner of a successful and very much in-demand design and fabrication shop.
In this episode, Morgan takes the time to drop some great advice on how we can all improve our fab skills, and discusses why he doesn’t feel the need to use CAD or 3D scanning in his work, bucking the industry-wide trend towards harnessing tech in the build process.
We then get into the juiciest part of the conversion, as Morgan goes deep into the details on his most well-known build, an incredible Lamborghini twin turbo V10-powered Range Rover Velar Prerunner, known as the MCD1 Dakar Prototype.
This machine is a testament to the idea that beautiful form follows well-executed function, and every inch of the jaw-dropping build is an absolute work of art, from the chassis, to the suspension, to the mid-rear mounted boosted V10 capable of 2000hp. We’re able to dig deep into this project’s inner workings and the concepts that make this desert-destroying weapon what it is.
With great discussions around the pros and cons of different materials, off road suspension system choices, what makes his vehicles so fast and capable and plenty more, this episode featuring Morgan Clarke is a must-listen.
Follow Morgan here:
IG: @morganclarkedesign1
YT: MORGAN CLARKE DESIGN
TK: morganclarkedesign1
WWW: shopmcd1.com
Don’t forget, you can use MCD100 to get $50 off HPA’s Motorsport Fabrication Starter Package: https://hpcdmy.co/fabpackageb
Time Stamps:
4:03 How did you get into cars?
7:00 Where does your engineering knowledge come from?
13:26 What sort of off-road vehicles are you building?
17:47 How did you learn to fabricate?
23:32 Welding Chromoly
31:25 How did you get into motorsport fabrication?
37:06 Tips on how to develop fab skills
41:48 How and when do you use CAD?
47:15 Fabricated vs billet
50:34 What is the Dakar Prototype and how did the concept come to life?
58:56 Pros and Cons of Independent rear suspension vs live rear axle
1:05:09 Engine package
1:09:45 Drivetrain
1:13:42 What electronics are you using?
1:15:30 Designing and manufacturing complex parts
1:18:43 How do you feel about such a work of art being beaten up when driven in the desert?
1:22:44 Overview of MCD and how you got it to what it is today?
1:36:03 Final 3 questions -
Petcock. Pillion. Backing the Bike In. If you’ve ever heard riding buddies throw these words around and been too embarrassed to ask what they mean… this is the episode for you! Zack and Spurg define and dig into the confusing slang and technical terms sent in by our listeners.
Check out more from RevZilla:
Common Tread: News, opinions, and written reviews RevZillaTV: Bike reviews, How-To's, and product videos -
Have you ever wondered how small aftermarket companies are able to drastically improve on parts from OEMs and huge players like Garrett or Borg Warner that have massive R&D departments and even bigger budgets behind them? If you ask this week’s guest, Robert Young of Forced Performance and Xona Rotor, he’ll tell you: “We try harder and we’re better at it”.
Of course, the reality isn’t quite that simple… Luckily we’ve got a full two hours to dig into this topic and many others surrounding the world of performance turbocharging.
Use FORCED25 to get $25 off HPA’s Boost Control Tuning Course: https://hpcdmy.co/boostb
On this episode of Tuned In, we start by looking at how Robert became the turbocharger guru he is today as the name behind Forced Performance and Xona Rotor — the latter formed in partnership with Greg Jones of Tial Sport.
This is a story that involves years spent studying physics and mechanical engineering, as well as hands-on experience at turbo shops and with his own projects that ranged from old Ford Fairlanes and fast air cooled VW drag cars, to the early DSM drag world of rapid Mitsubishi Eclipses.
Both Robert’s companies produce ultra high performance aftermarket turbochargers and turbocharger components for a range of vehicles, and as one of the main brains behind these sought-after products, Robert is an absolute goldmine of turbo knowledge.
This means that the conversation quickly dives very deep into the world of boost, discussing a huge range of topics — journal vs ball bearing, billet compressor wheels, compressor maps, turbo sizing, and so much more.
This episode is a true turbo tech info dump in the best way possible. If you have any interest in going fast, don’t sleep on this fascinating conversation with a big brain of the forced induction world.
Follow Robert here:
IG: @forcedperformance, @xonarotor
FB: Forced Performance Turbochargers, Xona Rotor
WWW: forcedperformance.shop, xonarotor.com
Don’t forget, you can use FORCED25 to get $25 off HPA’s Boost Control Tuning Course: https://hpcdmy.co/boostb
Time Stamps:
3:35 How did you get involved with cars?
8:52 Where did the passion for turbocharging come from?
20:15 Starting your own turbocharger business?
25:10 How hard was it to design a cast stainless steel exhaust housing?
29:06 Ball bearing vs journal bearing turbos
38:51 Forced Performance overview
43:35 Turbos for Subaru’s EJ engine
47:10 How did Xona Rotor start?
51:42 Why didn’t you copy Garrett’s bearing technology?
59:46 Why is Xona Rotor its own company?
1:01:51 How are Xona Rotor turbos so good, frustrations of copied turbos
1:11:40 Development process for the compressor wheels?
1:31:34 Evolution of turbine wheels
1:44:06 How do we find the right size turbo?
1:59:22 Final three questions -
On this weeks episode of Trapped Under Plastic, Scott and Jon discuss what does and doesn't work on their YouTube Channels.
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versons: http://www.trappedunderplastic.com/
On patreon, we offer our patron's the ability to submit topics for us to discuss during a podcast, you get an extended version of the podcast, and you can submit miniatures for us to critique during an episode!
Relevant Links
New Miniac Video:
https://www.youtube.com/watch?v=kKNm0dU71uY
New Ninjon Video:
https://www.youtube.com/watch?v=FvhzqEcxwsk
00:00 Start
01:16 Preamble Ramble
01:00:39 What We Painted
01:15:00 Topic DiscussionSupport the show
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versions: http://www.trappedunderplastic.com/ -
Creating high-end race cars and parts for a living is a dream for many of us, but how do you turn that dream into a reality? We don’t have all the answers, but we can pick the brains of the people who’ve pulled it off, like this week’s guest, Joe Scarbo.
Use SCARBO50 to get $50 off HPA 3D Modelling course: https://hpcdmy.co/CADb
Joe Scarbo of Scarbo Performance and Scarbo Vintage began his love affair with all things motorised like many of us — young and elbow-deep in a deconstructed radio control car trying to fix and improve it. This episode first covers Joe’s early days as he gained an appreciation for all things automotive through his love of both RC cars and go-karting. After a few too many crashes in the kart, Joe steered his passions towards the engineering side of the game, and began building his first car completely from scratch.
With little experience and zero computer power, Joe designed and built a four-seater 350 SBC-powered off-road sand car that’s still hitting the dunes to this day, despite it being finished before Joe was even out of his teens.
While he was still studying mechanical engineering at university, Joe found himself employed as a fabricator and machinist at a high-end race shop. From there, his career began to snowball as his design skills became more and more in demand. We dig into the design side of Joe’s career in this conversation, discussing the creation of strong and light wheels, chassis’, and everything in between.
After that, Joe talks us through different fabrication and manufacturing processes, discussing some of the pros and cons around CNC, water and laser cutting, notching, materials, and more. This chat also goes into the business side of the equation as we attempt to answer age-old questions like: how do you accurately quote your work? And when is it better to just outsource certain jobs?
The star of this episode, though, is undoubtedly Joe’s current passion project, the SV1 Rover. This monster off-roader is a marvel of engineering, and a machine that Joe has labelled the world’s first “hyper truck”. Whether he’s right or wrong about that we’ll leave up to the listener, but either way, the details we get into on this 30-inch travel go-anywhere-at-very-high-speeds beast is well worth a listen. Find out how it was designed, what powers it, what it’s capable of, and much more in this episode of Tuned In.
Check out Method Race Wheels here: https://www.methodracewheels.com
Follow Scarbo Performance here:
IG: scarboperformance
FB: Scarbo Performance Corp
WWW: scarboperformance.com
Don’t forget, you can use SCARBO50 to get $50 off HPA 3D Modelling course: https://hpcdmy.co/CADb
Time Stamps:
3:30 How did you get interested in cars?
8:32 What did you become passionate about through your mechanical engineering degree?
14:27 Designing a car at 19, how did you figure out how strong to make all the components?
18:20 What happened after your degree?
25:31 Design work for Method Wheels
31:35 How do you balance weight, strength vs looks when designing wheels?
36:27 Starting your own company
52:18 Overview of Scarbo Performance
1:08:48 SV Rover — what was the initial concept?
1:18:13 How much did RC cars influence your design?
1:46:43 Engine configuration in the SV Rover and an EV option?
1:50:01 Did the SV Rover work out of the box or were there teething issues?
1:57:28 Where is the SV Rover at? Are you going to be offering this to customers?
1:58:59 Final three questions -
Stay protected against cyberthreats and get immutable backup, rapid recovery and anti-ransomware technologies with Acronis! Check the out at go.acronis.com/WANshow
Visit https://www.squarespace.com/LTT and use offer code LTT for 10% off
Check out the MSI MPG 491CQP QD-OLED at https://lmg.gg/H0d4t
Secretlab’s Titan Evo is not your regular old gaming chair. See why at https://lmg.gg/secretlabwan
The LG gram is not only portable but powerful too. Check out the LG gram at: https://bit.ly/3zhv8Wq
Buy something from dbrand so they have an excuse to keep messing with Linus. Visit http://dbrand.com/WAN
Get a special deal on Private Internet Access VPN today at https://www.piavpn.com/LinusWan
Purchases made through some store links may provide some compensation to Linus Media Group.
Learn more about your ad choices. Visit megaphone.fm/adchoices -
Check out Remotly today at https://remotly.com/download?promo=WANShow
Visit https://www.squarespace.com/WAN and use offer code WAN for 10% off
Join the JumpCloud Community to connect with other IT professionals at https://cloud.jumpcloud.com/WANShow-Community
Secretlab’s Titan Evo is not your regular old gaming chair. See why at https://lmg.gg/secretlabwan
The LG gram is not only portable but powerful too. Check out the LG gram Labor Day Promo at: https://bit.ly/3zhv8Wq
Get a special deal on Private Internet Access VPN today at https://www.piavpn.com/LinusWan
Go to https://www.ridge.com/circuitboard to sign up for the release
Purchases made through some store links may provide some compensation to Linus Media Group.
Learn more about your ad choices. Visit megaphone.fm/adchoices -
The Suzuki SV650’s interesting history and monumental impact on the world of motorcycling made it the perfect bike to kick off our new “Motorcycle Icons” series! Whether you own an SV650 or not, you’re sure to enjoy learning more about this prolific ride.
Check out more from RevZilla:
Common Tread: News, opinions, and written reviews RevZillaTV: Bike reviews, How-To's, and product videos -
Timestamps:
0:00 Intro
2:35 Topic #1: Judge dismisses shareholder lawsuit over Tesla's FSD
3:36 Examples of disclaimers, Tesla's lawyers, corporate puffery
7:05 MotherFrunker, puffery examples, LTT, WAN
20:04 Luke mentions LTT's thumbnails
26:38 Riley appears to mention his week on Floatplane
29:54 Topic #2: Meta's smart glasses can be used to Doxx randoms
33:46 Linus on Riley's perfect puffery example
34:08 They discussed this before, profiling, "this is scary"
42:58 "Linus is an example for why laws are myopic"
45:16 Merch Messages - Did iFixit contact LTT over the screwdriver?
49:21 LTTStore's new polo long sleeve shirt
51:02 Great sale of office attire, cargo pants in-seam update
52:10 Voluntary modeling, showing shirt standing up
54:24 Modmat newsletter, Ghost Keyboards' apology
56:18 What earbuds would Linus recommend? ft Linus's iPhone 16
59:14 Topic #3: Linus's CompTIA certificate, possibly revoked
1:01:55 Topic #4: Ring Alarm users' plan changes, doubles the pay
1:03:44 Puffery, Luke's refund scenario, contracts & protections
1:09:41 Sponsor - Manscaped
1:10:51 Sponsor - Squarespace
1:11:57 Sponsor - 1Password
1:13:04 Merch Messages - Apple dominates HEDT as others were late?
1:18:45 Was there a point you questioned keeping a promise?
1:26:26 Thoughts on continuous returns?
1:31:29 Topic #5: California's law tries to anonymize Neuralink data
1:34:27 CGP Grey's Rules for Rulers, "cult town"
1:37:05 "Eat the rich" line, Linus's net wealth, inverted pyramid
1:42:44 Where's the line? Trolley problem, Gates VS Bezos
1:46:37 "Living outside of your means," landscapes, farm fields
1:51:48 Is the line power? Langley's house, "being nice"
1:55:53 Dan asks where Linus's power is, buying politicians
1:56:56 Sales listing of an abandoned commercial building
1:59:41 "EAT THE RICH" shirt, Linus on cost of renovations
2:04:28 "Rent the parking spots," value, Yvonne's $2M idea
2:06:16 Building tour video, Luke calls Linus out on ad piracy
2:08:02 Can fit LMG, Luke's LinusBucks idea, problems & taxes
2:11:58 Topic #6: Nintendo strikes YT channel over showing emulation
2:13:41 Merch Messages - Did Luke consider Flutter for FP?
2:14:22 Does Linus have any pictures of his Suzuki?
2:15:34 Thoughts on Star Citizens charging $40 for the Atlas?
2:18:12 Has Luke played ZERO Sievert? ft Broken Superchats
2:19:20 Would Luke get an AMD tech upgrade if Linus chooses parts?
2:21:32 Topic #7: Reddit takes down the ability to protest
2:21:48 Topic #8: Extraction Shooter's devs start a Kickstarter
2:22:48 Topic #9: Cutting Zuck's $400 gray shirt for a fabric sample
2:33:14 Merch Messages #4
2:33:25 Question you'd ask Jensen & Lucy? ft Zuck's fashion
2:39:44 Would AMD not doing high-end GPUs affect AIBs? ft Jensen's kitchen
2:47:18 What's Linus's driving force to work at NCIX?
2:48:04 Did Linus experience the mura effect on Bigscreen Beyond?
2:49:35 Has Linus seen increase to general hysteria due to tech?
2:50:13 Outro
Get The Chairman™ Pro Package for 20% OFF + Free International Shipping with code wanshow at https://manscaped.com/wanshow
Visit https://www.squarespace.com/WAN and use offer code WAN for 10% off
Check out 1Password Extended Access Management at: http://1password.com/wanshow
Secretlab’s Titan Evo is not your regular old gaming chair. See why at https://lmg.gg/secretlabwan
The LG gram is not only portable but powerful too. Check out the LG gram Labor Day Promo at: https://bit.ly/3zhv8Wq
Buy something from dbrand so they have an excuse to keep messing with Linus. Visit http://dbrand.com/WAN
Get a special deal on Private Internet Access VPN today at https://www.piavpn.com/LinusWan
Purchases made through some store links may provide some compensation to Linus Media Group.
Learn more about your ad choices. Visit megaphone.fm/adchoices -
On this episode of Trapped Under Plastic, Scott and Jon answer more of your saucy questions!
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versons: http://www.trappedunderplastic.com/
On patreon, we offer our patron's the ability to submit topics for us to discuss during a podcast, you get an extended version of the podcast, and you can submit miniatures for us to critique during an episode!
Relevant Links
New Miniac Merch:
https://miniac.co/
Ninjon & Vincy V Video:
https://www.youtube.com/watch?v=bNeY82fm0as
My Mini Factory Link:
https://www.myminifactory.com/users/tiredworldstudio
Miniac Channel:
https://www.youtube.com/@Miniac
Ninjon Channel:
https://www.youtube.com/@Ninjon
00:00 Start
04:58 Preamble Ramble
28:40 What We Painted
43:27 Topic DiscussionSupport the show
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versions: http://www.trappedunderplastic.com/ -
On this weeks episode of Trapped Under Plastic, Scott and Jon discuss each hobby brand and give them their harsh tendie ratings.
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versons: http://www.trappedunderplastic.com/
On patreon, we offer our patron's the ability to submit topics for us to discuss during a podcast, you get an extended version of the podcast, and you can submit miniatures for us to critique during an episode!
Relevant Links
Miniac Channel:
https://www.youtube.com/@Miniac
Ninjon Channel:
https://www.youtube.com/@Ninjon
00:00 Start
00:55 Preamble Ramble
46:54 What We Painted
01:05:56 Topic DiscussionSupport the show
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versions: http://www.trappedunderplastic.com/ -
Imagine if Formula 1 got rid of most of its rules and regulations — how fast could they go? The freedom to design and build whatever will result in the fastest time is a dream for many in the higher levels of motorsport, but for British hillclimb champion Alex Summers, it’s a reality.
Use ALEX100 to get $100 OFF HPA’s Track Day Package: https://hpcdmy.co/trackdayb
There have been a lot of great families in motorsport over the years — the Earnhardts, the McRaes, the Andrettis — but when it comes to the prestigious world of British hillclimbing, one surname is better recognised than most — the Summers. This week’s guest, Alex Summers, comes from legendary hillclimbing stock, with his grandfather, father, and mother all committed participants of the sport at the highest levels. That Alex is a British hillclimb champion and three-time runner-up isn’t much of a surprise with that kind of family history.
In this episode, we first cover Alex’s early days in racing, as well as his schooling and engineering education. Starting out working for McLaren during a university placement, Alex then moved to Aston Martin, where he’s been for the last decade. During all that time, he’s never stopped racing.
This leads us to his current weapon of choice, the ‘P4t’. This absolute rocketship was designed, engineered, and built by Alex himself. It weighs 500kg and runs a 700hp, 16,000rpm Cosworth IndyCar V8, resulting in one of the fastest cars on the generally very short venues that make up the British hillclimb championship season. Unlike many overseas competitions, Britain doesn’t have much in the way of elevation, meaning runs generally last well under a minute.
This form of very short and sharp racing is described as “drag racing with corners” by Alex, and this, along with very few regulations, makes for some very unique requirements when building a competitive car. We dig deep into the P4t build, asking the big questions about the engine, chassis, and suspension setup.
Alex is also known for his involvement with the McMurtry Spéirling development team, and was one of the first drivers to test the insanely fast 1000hp fan car. We find out what a car as fast and unique as the Spéirling and its 2000kg of downforce is actually like to drive and what it takes to get record-setting runs out of it.
Follow Alex here:
IG: @alex_summers_hillclimb
YT: Alex Summers
TK: @alex.summers.hillclimb
Don’t forget, you can use ALEX100 to get $100 OFF HPA’s Track Day Package: https://hpcdmy.co/trackdayb
Timestamps:
3:47 How did you develop an interest in cars?
6:27 How much time do you need to spend in a kart to be really good?
11:57 Seriousness of the British Hill Climb Championship
18:42 What’s your formal education?
26:39 Opportunities in the UK for high-end motorsport
31:29 Australian V8 Supercars and British touring cars
34:34 What happened after you finished your degree?
40:20 How do you mentally switch on for a hill climb run?
47:55 How do you improve at hill climb when track and car time is limited?
59:44 What are these hill climb cars based off?
1:02:28 Would a British hill climb car be competitive at Pikes Peak?
1:05:36 Pros and cons of turbocharging in these cars, different engine combinations
1:12:57 How do you set up suspension with your aero package for hill climb?
1:18:13 What is a heave spring and how does it work?
1:21:05 How and why the carbon monocoque?
1:35:10 How did you get involved with the McMurtry team?
1:41:08 How do you guess as a driver the level of grip available from -
Zack & Spurg have the best mods to get the most out of your motorcycle… whether you’re heading across town, across the country, down the track or off the beaten path.
Also on the show: Are hydrogen motorcycles the real future of riding? And an engine-sound guessing game for the ages.
Check out more from RevZilla:
Common Tread: News, opinions, and written reviews
RevZillaTV: Bike reviews, How-To's, and product videos
-
On this weeks episode of Trapped Under Plastic, Scott and Jon answer some questions from our audience about the hobby!
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versions: http://www.trappedunderplastic.com/
On patreon, we offer our patron's the ability to submit topics for us to discuss during a podcast, you get an extended version of the podcast, and you can submit miniatures for us to critique during an episode!
Relevant Links
Miniac YouTube Channel:
https://www.youtube.com/@Miniac
Ninjon YouTube Channel:
https://www.youtube.com/@Ninjon
00:00 Start
01:04 Preamble Ramble
40:14 What We Painted
01:03:25 Topic DiscussionSupport the show
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versions: http://www.trappedunderplastic.com/ -
Thanks to MANSCAPED for sponsoring today's video. Get 20% Off + Free International Shipping with promo code WANSHOW or visit http://manscaped.com/wanshow
Check out 1Password Extended Access Management at: https://1password.com/product/xam
Get a mooooove on, check out Moosend free for 30 days at https://lmg.gg/moo and use code LTT for 10% off any monthly plan for the first 3 months
Check out the Secretlab Titan Evo Ergonomic Gaming chair and more at https://lmg.gg/secretlabwan
Get a special deal on Private Internet Access VPN today at https://www.piavpn.com/LinusWan
Get notified when the Special Edition of the DeltaHub x LTT Carpio 2.0 Wrist Rest releases! Do your wrists a favor a check it out at: https://go.deltahub.io/carpio-ltt-edition-wanshow
Subscribe to Floatplane and get early access to ALL Scrapyard Wars releases this season, plus tons of extras and who knows, maybe we’ll be giving some stuff out there too. Join us over at https://lmg.gg/scrapwars24
Jawa’s massive Scrapyard Wars giveaway is live! They’re THE marketplace for gamers to buy and sell their gear. Check them out at https://jawa.link/ScrapyardWAN
Purchases made through some store links may provide some compensation to Linus Media Group.
Timestamps (courtesy of NoKi1119):
0:00 Chapters
1:50 Topic #1 - AI friend necklace
8:36 Topic #2 - James Pumphrey leaves Donut Media
17:43 Topic #3 - Activition's MW3 study on skill-based matchmaking
27:40 "What if I wanted to relax?" TF2 & team stacking
37:20 Dan's invoice to be done NOW or the show won't proceed
41:02 Linus points out the wrong time, "I'm quitting freelancing!"
43:20 LTTStore's new Chroma T-shirt
43:55 MA Oxford shirt, Maria's proud of the shoots, sizes
46:45 Merch Messages: any features that'd make you switch to ZOTAC's handheld?
48:45 Thoughts on Raspberry Pi going public?
52:29 Thoughts on getting change in a niche duopoly?
54:22 Topic #4 - StopKillingGames starts an online petition for the EU
56:46 Backpack carabiner update
58:50 Topic #5 - Intel's warranty for 13th & 14th gen
1:01:20 Intel's 15,000 layoffs, stock drops to an all time low
1:03:22 Techquickie's Intel video drama, bad faith comments
1:07:57 Topic #6 - Popular dating apps stalking vulnerability
1:11:52 Bad faith comment examples
1:16:36 Topic #7 - YouTube battles ad blocker using black screens
1:20:44 Scrapyard Wars 9 part 2 uploaded on Floatplane
1:25:38 Jawa giveaways, more people to join ECC squad
1:26:56 Sponsor - Manscaped
1:28:36 Sponsor - 1Password XAM
1:29:44 Sponsor - Moosend ft. Legless horses, "dressage"
1:33:42 Merch Messages: How does Linus find fulfillment ft. YT's broken search
1:48:05 Did Linus consider water level sensors for the loops?
1:52:32 Convince higher ups avoiding YT is bad for the company?
1:56:40 Topic #8 - Eshtek collaborates with TrueNAS for HexOS
2:08:05 Topic #9 - Meta under investigations over drug dealer ads
2:09:32 Topic #10 - Google's Gemini AI ad from Olympics causes commotion
2:14:08 Linus's Qualcomm laptop challenge, battery lifetime
2:19:06 Topic #11 - RTINGS tests 100 TVs for longevity
2:21:42 Topic #12 - CPSC finds 60% of Amazon sales include unsafe products
2:27:40 Merch Messages #4 ft. WAN Show After Dark,
2:28:02 Standards the world would be better off without?
2:32:10 Favorite Beat Saber levels, settings & tips to improve?
2:34:20 Most important things you lost while biking or traveling? ft. "Big nose"
2:39:32 Would Linus do an interview with Hank Green?
2:39:59 Mean commentor's apology to James, does this induce toxicity?
2:42:38 Thoughts on home theater setups for PCs?
2:46:00 Outro I
Learn more about your ad choices. Visit megaphone.fm/adchoices -
Legendary tuner Shane Tecklenburg returns to talk about turning LMP3 race cars into hill climb monsters, calibrating V12 air race planes, the realities of compound turbo setups, and much more.
Use “SHANET100” to get $100 off HPA’s Tuning Starter Package: https://hpcdmy.co/tuningpackageb
Shane Tecklenburg, or “Shane T” as he’s more commonly known, is one of the biggest names in the tuning industry, and for good reason. This long-time friend of High Performance Academy has been in the EFI tuning game for many years now, and has a reputation as the ultimate problem solver who can rectify all manner of difficult tuning issues that others have given up on.
After appearing in episode #1 back in 2021, Shane now returns for episode #120, allowing us to catch up on his latest projects, starting with an in-depth look at what it takes to transform an LMP3 circuit racer into a hill climb weapon with a sub-10 minute Pikes Peak ascent in its sights.
This leads us into a fascinating conversation around anti-lag, IMAP vs EMAP, and retaining as much power as possible as a car gains altitude.
Next, we get an interesting insight into the world of air racing, as Shane details his tuning adventures with V12-powered Thunder Mustang race planes and the unique challenges that come with calibrating these unique machines and their dual ECUs.
Back in 2021, we talked to Shane about one of the most interesting projects he’s been involved with — the Mazworx SR20VE-powered triple-compound turbo drag car. This machine is fairly well-known online thanks to its incredible aesthetics and unique turbo setup, so the update on this project from Shane is a very welcome one as the team strives for that magical 3000hp goal. The conversation then falls down the very deep compound turbo rabbit hole as Shane gets into the finer details of this forced induction arrangement.
As mentioned, you can listen to episode 60 featuring JT Oliver of JTO Power here.
Follow Shane here:
IG: @tunedbyshanet
FB: Tuned By Shane T
YT: TunedbyShaneT
WWW: motorsportcontrol.com
Don’t forget, you can use “SHANET100” to get $100 off HPA’s Tuning Starter Package: https://hpcdmy.co/tuningpackageb -
Thank you to Warcrow and Corvus Belli for sponsoring this weeks episode! Check them out in the links below.
https://warcrow.com/
https://store.corvusbelli.com/en/warcrow/wargame/miniatures/winds-from-the-north-bundle-en
On this weeks episode of Trapped Under Plastic, Scott and Jon discuss their dislikes of Games Workshop and their business practices.
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versions: http://www.trappedunderplastic.com/
On patreon, we offer our patron's the ability to submit topics for us to discuss during a podcast, you get an extended version of the podcast, and you can submit miniatures for us to critique during an episode!
Relevant Links
Miniac Recent Video:
https://www.youtube.com/watch?v=ELXPq6Q3lRs
Ninjon Recent Video:
https://www.youtube.com/watch?v=EBPHeFkD6Dg
00:00 Start
00:48 Preamble Ramble
36:12 What We Painted
48:54 Topic DiscussionSupport the show
Support the Show on Patreon: https://www.patreon.com/trappedunderplastic
Support the Show with Merch: https://teespring.com/stores/trapped-under-plastic
Follow Jon: https://www.youtube.com/ninjon
Follow Scott: https://www.youtube.com/miniac
Join the FB group: https://www.facebook.com/groups/395664561386239/
Listen to the audio versions: http://www.trappedunderplastic.com/ -
What does it take to build, tune, and drive a monster Mitsubishi Evolution VIII with a 4.1-litre VR38DETT putting down 1065 hp to all four treads — on pump gas, no less? On this episode of Tuned In, we talk to the Armchair Tuner to find out.
Why ditch the 4G63?Why the VR38DETT?How is it still 4WD?What was the hardest part of the build and how was it dealt with? Has it changed how the car drives?Why even build something as unique as this car in the first place?
Use “EVO100” to get $100 off HPA’s Tuning Starter Package: https://hpcdmy.co/tuningpackageb
Conrad Bradley has been building fast cars and bikes for a long time, although he currently works outside of the automotive industry in the nuclear field. Conrad couldn’t tell us much about his current work projects for obvious reasons, but when it comes to his many interesting automotive projects, he’s an open book.
Over the years, Conrad’s built many fast cars — from rapid Subarus, to even faster Evos, to an immaculate Beams-powered AE86 — we discuss all those builds in this conversation, but it’s his one-of-a-kind Evolution VIII that we’re most interested in.
We dive deep into this build with Conrad, digging into the big questions, like:This is a fascinating look into a very serious build that presented a lot of problems, requiring unique solutions.
Further into the conversation, we also discuss the challenges of owning and operating a tuning shop, reflashing challenges, Evo strengths and weaknesses, and much more. This is a great listen for anyone interested in thinking outside the box when it comes to building cars and going fast.
Follow Conrad here:
IG: @armchairtuner
FB: Armchairtuner
YT: Armchair Tuner
Don’t forget, you can use “EVO100” to get $100 off HPA’s Tuning Starter Package: https://hpcdmy.co/tuningpackagebTime Stamps:
4:25 How did you form an interest in cars?
14:01 How did you end up owning a tuning shop?
20:43 Pros and cons of owning a tuning shop.
27:50 Transition from motorbikes to cars.
29:23 Why JDM vehicles?
34:05 Reflashing JDM vehicles.
39:29 Was it Subaru's reliability issues that drove you to the Mitsubishi platform?
43:04 Toyota AE86.
58:03 Back into the Mitsubishi world? Evo X.
1:04:17 Manufacturers making it difficult for us to tune modern engines.
1:09:34 What came after the Evo X?
1:11:31 Building an Evo for drag racing.
1:24:36 How did the Evo GT-R come about?
1:27:36 What was involved in fitting the VR38?
1:34:49 What is the transmission?
1:41:22 Motec M1 custom package for 4wd setup
1:47:10 How much does it weigh with the VR38?
1:48:06 What was the goal for the VR38?
1:56:07 Are you running PDMs?
1:58:50 Are you using the data from all your sensors for anything in particular?
2:00:02 Is the Evo GT-R finished?
2:06:09 Final 3 questions. -
Do I need electronic wastegate control? What about CO2? And how do I know what size wastegate is needed for my build? These questions and a whole lot more are answered thanks to this week’s guest, Matt Wright from Turbosmart.
Use “MATT25” to get $25 OFF HPA’s Boost Control course: https://hpcdmy.co/boostb
Matt has a unique understanding of the industry, having worked for two of Australia's biggest aftermarket performance brands — two decades at Haltech and a more recent move to Turbosmart.
We start this episode by delving into the path that Matt took to get where he is today, covering the early days of Haltech that saw him dealing with some fairly rudimentary electronics and software as a support tech. Matt grew with the company and would go on to head up Haltech’s expansion into the United States. There are some great discussions here about VE-based tuning, the future of standalone ECUs, and what Matt thinks is missing from the current crop of standalone offerings.
After 20 years of service, Matt decided to move across the road to Turbosmart, where he’s helped push the development of new products — especially its new range of turbochargers. Matt discusses these new turbos before diving deep into the world of boost control, getting way into the weeds on all things external wastegate.
Sure, the idea behind a wastegate is simple enough, but things get a little more demanding and complex when a vehicle’s performance starts to get pushed to its limits.
Follow Matt here:
IG: @turbosmarthq
FB: Turbosmart
YT: Turbosmart
WWW: turbosmart.com
Don’t forget, you can use “MATT25” to get $25 OFF HPA’s Boost Control course: https://hpcdmy.co/boostbTimestamps:
4:39:20 How did you gain an interest in cars?
16:54 Did you move into Haltech tech support with almost no tuning experience
24:28 What was your role at Haltech?
27:10 The difference between American and Australian car scenes
32:15 Haltech’s growth into the US market
39:45 Key changes in ECU tech over the years
47:30 What do you think is missing from aftermarket ECUs?
54:43 How does an ECU company balance technical features while keeping it user-friendly?
1:03:55 How did the opportunity at Turbosmart come up?
1:08:38 Overview of Turbosmart
1:13:10 Turbosmart’s external wastegate, Why is it so good?
1:17:54 Pros and cons of electronic wastegate?
1:34:08 What is a StraightGate?
1:42:52 How do we pick the right size wastegate?
1:47:30 Bringing Turbosmart turbochargers to market
2:05:35 Final 3 questions -
Add AG1 to your morning routine and see what it can do for you: http://drinkAG1.com/WANshow
Visit https://www.squarespace.com/WAN and use offer code WAN for 10% off
Save big on PC games ranging from AAA titles to indie classics at Green Man Gaming’s Summer Sale! Get an additional 15% off using code SUMMER15 at https://bit.ly/LINUSSUMMER (Some Restrictions Apply)
Check out the Secretlab Titan Evo Ergonomic Gaming chair and more at https://lmg.gg/secretlabwan
Get a special deal on Private Internet Access VPN today at https://www.piavpn.com/LinusWan
Get notified when the Special Edition of the DeltaHub x LTT Carpio 2.0 Wrist Rest releases! Do your wrists a favor a check it out at: https://go.deltahub.io/carpio-ltt-edition-wanshow
Subscribe to Floatplane and get early access to ALL Scrapyard Wars releases this season, plus tons of extras and who knows, maybe we’ll be giving some stuff out there too. Join us over at https://lmg.gg/scrapwars24
Jawa’s massive Scrapyard Wars giveaway will launch alongside the YouTube release of Episode 1, but you can check them out in the meantime! They’re THE marketplace for gamers to buy and sell their gear. Pay them a visit at: https://jawa.link/ScrapyardWAN
Purchases made through some store links may provide some compensation to Linus Media Group.
Learn more about your ad choices. Visit megaphone.fm/adchoices - Show more
