Episodi
-
It’s time once again to check in with “Uncle” Dave and find out what’s happening in the Abeles clan. Whether it’s dealing with day-to-day life, unboxing of Rapido Trains fabulous new E8 locomotives or the trials and tribulations of day-to-day life. It’s always an interesting discussion while throwing another log on the fire and sitting back with your favorite wobbly pop.
In this installment, Dave shows his new enthusiasm for Conrail’s Office Car Special and how much fun he’s having learning all about passenger cars, plus some modelling tips about stripping paint from a Union Pacific sleeper car. But that’s not all, if you listen close enough, you might even get a hint about the next book he’s planning. It’s a great podcast and one we’re sure you’ll enjoy.
-
Balancing a hobby with the responsibilities of raising a family can feel a lot like a well-practiced juggling act, but it’s definitely possible and even beneficial, for both the modeler and the family!! The hobby of model railroading can provide an outlet for creativity and stress relief, which can make you a more patient partner and parent. Finding ways to involve your family in your hobby or setting aside dedicated "you" time can help strike that balance.
So, we here at the ole’ AML Network in downtown Busted Knuckle, Kentucky gathered together three of our favorite Dads to find out their secrets to enjoying the hobby while at the same time fulfilling their obligations to their kids and even more importantly, life partner. Model railroading is a great way to teach kids about craftsmanship, history, and in some cases involve everyone in the layout building process. Enjoy!!
-
Episodi mancanti?
-
The Station Inn located in Cresson, Pennsylvania was built in 1866, situated just ten miles west of the famous Horseshoe Curve, it was originally built as a hotel for weary travelers heading east or west on the Pennsy Railroad. Over the last hundred and fifty years it’s gone through many changes including the early 90’s when it was purchased by Tom Davis and turned into the place railfans of all kinds from across the globe would come to stay.
Fast forward to present day, after Tom passed away in 2021 it was purchased by Alex Lang and his wife Leah who over the years had built a deep friendship with innkeeper and decided they wanted to keep the tradition and memory of Tom alive. It’s been an adventure for the couple who reside an hour and a half away but as you listen to this podcast, you’ll quickly realize their passion for the Station Inn is something we can all be truly thankful for. Enjoy!!
-
It’s time once again for our courageous crew of confused modelers to gather around the studio to discuss the latest happenings. Originally this podcast was intended to be about Bradd Williamson’s new talking detector, but it quickly morphed into a loosely produced edition of the “Fans.”
“the TableMaster” talks about ripping out his current layout and replacing it with something of lessor quality while the “the Queso Cowboy” describes his latest freight car model he purchased from 3D Central. In 1973, the Norfolk & Western Railroad converted a number of their F-20 53′ Flatcars to haul cab assemblies for Mack trucks from supplier to assembly plant.
And then finally “the stubby Professor” his talking detector he purchased on E-Bay from DJHayes electronics. It’s a speedometer kit measuring the speed of your train and doubles as a detector and works in any scale. It’s a fun podcast backed with tons of info and one we’re sure you’ll enjoy!!
-
Is the hobby growing or shrinking?? If you hang around the AML Studios long enough, there will be no doubt in your mind that we here in Busted Knuckle, Kentucky are convinced the hobby is growing rapidly day after day. But the age-old question remains, how we entice the younger generation to join the old guard in the never-ending quest of introducing model railroading to the world!!
This is a continuation of our discussion with Derrick Magnotta, a lifelong model railroader who as he approaches his mid-thirties can’t find any reason to join the NMRA. However, Derrick is definitely open to new ideas and there’s even a great discussion about the possibility of an entry level free membership. It’s a great podcast and one we’re sure you’ll enjoy!!
-
So, you’re wondering what’s neat this week?? That’s easy just check out what Ken Patterson and his gang are doing over there on YouTube with the show that’s got its finger on the pulse of the hobby. We wanted to find out more about “the Dude,” Joshua Barton, Mike Budde and James Reiger, so we sat them down in front of a microphone and let the magic happen!!
This is a fun podcast that goes in all sorts of directions, and we find out all about the guys just before they’re about to record another show. Ken is an accomplished, professional photographer, featured in numerous model railroad publications and marketing material over the years and is happy to share some of his secrets. Enjoy!!
-
John Doehring might be the most enthusiastic man in the National Model Railroad Association, as the Eastern Director he is obviously putting his heart and soul into figuring out how to make the organization and the hobby of model railroading grow. This is part two of a response and discussion about his email pointing out his view of what direction to take the NMRA.
In these changing times of social media, video games and a myriad of distractions in today’s world, John along with his fellow directors want to keep up with changing times. The podcast is a mix of ideas and discussion with plans to double the size of the membership over the coming years. It’s a great podcast and one we’re sure you’ll enjoy!!
-
It’s time once again for another exciting episode of “Uncle” Dave’s Fireside Chat. On this edition of the “chat” Dave tells the history of the latest New Jersey Transit Heritage unit, a replica of Conrail’s 4208 and the behind-the-scenes story of how it came to be, all the folks involved, and the excitement felt around the railroad as it was rolled out during a very special ceremony.
Plus we talk about Dave’s excitement with the release of his newest book “Designing and Operating Yards,” which is an update on Andy Sperandeo’s original yard book published some years ago. We find out if there’s plans for another book and what the topic or topics might be. As always, it’s a busy time in the Abeles household and fun to be along for the ride. Enjoy!!
-
It’s the wonder from down under, visiting from the land of Oz, throwing another shrimp on the barbie, Australia where everything happens tomorrow and home to the one and only NMRA Worldwide Director at Large, Martyn Jenkins. Fresh from his time in the lower forty-eight having a walk-a-bout and here to give us a full report on what was accomplished at the latest Board of Directors meeting at the NMRA’s national convention in Long Beach, California. It’s a great podcast and one we’re sure you’ll enjoy!!
-
The NMRA has long been the flag ship organization of model railroading, originally being organized in the mid 1930’s serving a critical role through the years in the growth of the hobby. But with everything times change, people change and in today’s world organizations like the NMRA struggle to maintain their membership.
Our next guest Derrick Magnotta who belongs to a generation that’s never known life without the internet, wrote a very insightful email about how people his age and younger struggled to see what value there is in belonging to the NMRA. So we here at the old AML Network decided to gather together in the studio some of our most knowledgeable old guys to understand the problem and perhaps offer some solutions. It’s a great podcast and one we’re sure you’ll enjoy!!
-
The NMRA Achievement Program also known as the “AP” is a guide to help you master the many crafts and skills necessary in the hobby of model railroading. As you get more proficient in of each of the skills, you can through various means have your work judged by others and if certain standards are met, will be issued a certificate acknowledging your achievement and work towards becoming a Master Model Railroader.
Getting involved in the AP program is incredibly easy and recently a good friend of the AML Nation was announced as the new chairman of the Achievement Program. Ray Persing, a lifelong model railroader and all-round good guy stepped up to the plate to take over this important role from his predecessor Frank Koch who’d held the position for many years. It’s a great podcast and one we’re sure you’ll enjoy!!
-
Just like that old bean casserole that you found in the back of the freezer from your Aunt Mildred at Thanksgiving four years ago, or the twenty bucks you find in an old pair of jeans, this version of the “Kelly Questions” has aged like a fine wine.
Emory Lehman III is a locomotive engineer for the BNSF and a longtime member of the AML Nation. After stopping by to remind us we’d forgotten about his attempt at the hobby’s most hard-hitting collection of questions, he tries on the tin-foil hat. There’s also a brief discussion about an upcoming showcase on the Iron City N-Scalers Facebook page. It’s a fun podcast and one we’re sure you’ll enjoy!!
-
Hey “yinz,” this is a really good podcast but unless you understand Pittsburgh slang you might not understand it all. Fortunately while our next guest is a lifelong resident of the area where three rivers converge to create the once hallowed ground known as “Three Rivers Stadium,” home to the “Immaculate Reception.” Ron Bohin is an avid O-Scale three rail modeler who graduated from school qualified to be aircraft mechanic, which of course explains how he ended up working for U.S. Steel and eventually became a locomotive engineer.
Then after that successful career, it was time to move on to the Port Authority of Allegheny County, now known as Pittsburgh Regional Transit. They needed signal maintainers and when Ron submitted his resume it seemed as though, no one else could be better qualified. If you’re as confused as we are, it’s time to fire up the Motorola and give a listen to this podcast, it’s actually pretty good!!
-
Once again, it’s time for another great discussion with “Uncle” Dave, so warm up the Motorola, get comfortable with a warm cup of cocoa as we settle in for a “Fireside Chat” with one of the hobby’s most interesting personalities. There’s lots to talk about and even some friendly fire as “Uncle” Dave takes exception with some of the Evel Overlord’s opinions about the NMRA
Plus, we pay homage to one of the great model railroaders of the modern era, Paul Dolkos whose contribution to the hobby has been extensive over the last fifty years. It’s a great podcast and one we’re sure enjoy.
-
Have ever wanted to see one of the best model railroads in the world, one that will take your breath away, one that seems so real it could easily be used a movie set. Well after an exhaustive search by our crack investigative reporters here at the ole’ AML Network, we’ve discovered just such a model railroad not from Detroit or as we like to refer to… HockeyTown U.S.A.
One of the greatest assets of this hobby is the ability to express oneself artistically, while still be able to enjoy so much more and our next guest Norm Charbonneau has managed to squeeze every last ounce out of what this hobby has to offer. His YouTube channel about his 3-Rail O Gauge layout is full of beautiful scenes of glamorous Pennsy steamers running through magnificent scenery plus tons of how-to’s about all sorts of interesting projects. This is a great podcast and one we’re sure you’ll enjoy!!
-
T-Trak is one of the easiest ways for any individual to get started in the hobby of model railroading. Building a small one-foot square module can easily help speed up the learning process of building a layout of any size, plus there’s numerous groups to join where you can join with others to create sizeable layouts to run your favorite equipment.
One of the most prolific T-Trak modelers is Andy Zimmerman who when he’s not busy being head of the Standards and Conformance Department for the NMRA has built dozens of modules strictly for the enjoyment of participating. Now he’s here to tell us all about the T-Trak world record attempt at the NMRA’s national convention coming up in 2026 in Chattanooga, Tennessee. It’s a great podcast and one we’re sure you’ll enjoy!!
-
Model railroading, or railway modeling, in Switzerland is alive and well, with many of the country’s hobbyists focusing on North American prototypes. We first met our guest several years ago as he was wrapping up a career as a locomotive engineer and beginning a new career as a police officer.
Our guest Robin Felder is a big fan of Norfolk Southern Railroad and brass locomotives in general, plus weathering HO scale equipment for himself and others is what keeps him busy when he’s not in training to become one of Switzerland’s finest. There’s also a philosophical discussion about the hobby and where it’s headed plus information about the local hobby scene. It’s a great podcast and one we’re sure you’ll enjoy!!
-
Answering ViewerMail is one of our favorites here at the ole’ AML studios, whether it's pro or con, it’s a chance to connect with your audience, hear their thoughts, and engage in meaningful dialogue, even when the feedback is critical. Recently John Doehring the Eastern of representative the NMRA’s board of directors took exception to some our views about the way the organization is being run and sent us a very thoughtful and insightful email stating his concerns.
This is a special edition of ViewerMail with John and some of the regular AML crew to discuss some of those concerns. It’s a great podcast with plenty of back and forth, in fact the discussion was so interesting we only managed to get halfway through and invited John back for a second episode. It’s a great podcast and one I’m sure you’ll enjoy!!
-
What happens when you take two guys who are excited about the hobby of model railroading, add some raw talent with electronics and over the top details?? You get John McGuire of Garden State Modelworks LLC and Scott Lupia of KV Models with his specialty, etched detail parts.
Aside from yelling at people across the aisle from their booth at the Springfield Train Show it’s been a very successful union between these two friends. Scotts foray into the world of 3-D printing, has also created some new possibilities for his friend John, and we discover some new ways of doing business in the model railroad industry. It’s a great podcast and one we’re sure you’ll enjoy.
-
Go west young man, these were the words that our next guest followed, leaving behind a beautiful model railroad that had been started in his parent’s mid-western basement. After spending several years refining his weathering techniques our next guest is thinking about the next great layout.
With law school successfully behind him, we decided here at the ole’ AML Network it was time to catch up with John Cafarelli and find out what he’s been up to. It’s a great podcast with some weathering techniques. Suggestions of other, YouTube channels to watch and plenty of interesting conversation.
- Mostra di più
